aaaaha ok, I understand now....
1) I don't think that Asterisk has any support for meter pulse detection
on analogue cards.
2) If you already have an ISDN line, why do you not spend the eur 20 on
a BRI card and do the job properly? The way you propose you are going
from ISDN --> Analogue --> digital
If you get a BRI card you do not have anything analogue in the way to
add echo etc. You will be MUCH happier with the end result, I promise!
http://www.solwise.co.uk/isdn.htm is what you need - take a look on
ebay, and you then need to use a bristuffed version of Asterisk.
Rgds
Tim
Patrick wrote:
On Thu, 2007-02-08 at 13:55 +0100, Tomislav Parčina wrote:
In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED] says...
Asterisk 1.2 has no support of t.38 whatsoever, the call will drop
before t.38 is ever utilised, not even pass-thru.
1.4 Adds support for T.38 pass through only and no other sort of
faxing, the endpoint must support T.38 and you must send your call to
a T.38 gateway and you must not use NAT anywhere in your network and
you must enable re-invites which could cause CDRs not to reflect the
true details of the call.
Asterisk/Digium also has no interest in any further interest in
expanding T.38 or faxing support in Asterisk.
Steve Underwood and the other fine persons that have helped to develop
the software DSPs and other stuff required for FoIP support also have
no interest in writing any further faxing support for Asterisk (RxFax,
TxFax + the newest span_dsp wont even compile, much less work under
Asterisk any more) probably because they know it will never be
included into the Asterisk code.
Someone please tell me this isn't truth.
Afaik it is true that it will not be included in the Asterisk source
because Steve will not disclaim the code to Digium (which he off course
is entitled to). I compiled the latest spandsp (iirc 0.0.3pre27) on a
FC6 box and it compiles fine.
On Steve's website there are versions of app_rxfax and app_txfax for
1.4. Takes some messing around with the 1.4 build system to get them
included but it worked for me last night. Those apps can be found here:
http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.4/
>From reading this list it seems you are better off using iaxmodem and
Hylafax (I guess that it assuming the fax comes in via TDM on the
Asterisk box). Or check out OpenPBX.org as they have done much work on
T.38 support (visit irc channel #openpbx on freenode.net to talk about
the current status).
Hope this helps.
Regards,
Patrick
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
