Make sure that your NIC and your X100 are not using the same interrupt. If they are, they will be competing for interrupts and they both will loose.
-- -- Steven http://www.glimasoutheast.org "Yuan LIU" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > I'm greatly surprised when testing an Asterisk box with 802.11g. Here's the > topology: > > VoIP caller --- 802.11g --- Asterisk --- 802.11g --- VoIP extension > | > FXO ___ PSTN extension > > When I call a VoIP extension on that box (from a VoIP extension), voice is > good. But when this box tries to bridge the call with > a PSTN extension, voice is completely broken. And it's not because of the > cheap X100P - when I ping the box, round trip is >4,000 > ms, most of the time causing timeout. Once the call hangs up, ping time > dropped to 1-2 ms. Ping time started to surge even when > FXO is simply ringing. > > If VoIP to VoIP extension call uses re-invite (which it did), voice is also > good in the Console channel. > > How can voice traffic stall 802.11g? (I haven't checked, but CODEC is likely > ulaw.) > > Yuan Liu > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users