some howto configuration for asterisk controlling ci$co router (pri/qsig ports especially) using mgcp interests me too... ;-)



Yehavi Bourvine +972-8-9489444 wrote
I am using a Cisco to connect Asterisk via PRI to our Nortel TX-1. The Cisco is
a "voice bundle" of 2,811 + E1 + PDLM card. Note that you need PDLMs as the
same number as the PRI channels you are going to define (i.e. 32 PDLMs for each
PRI).

I am controlling the Cisco via SIP; it works, but a few problems:

- Only basic connectivity. No additional features (like names) as the Cisco
  supports them only via MGCP (in MGCP is passes all the Q.sig signals to the
  PBX - Asterisk in this case - and it should do all the handling, but
  I did not find how to do it with Asterisk).


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to