*CLI> NOTICE[81926]: File chan_sip.c, Line 5215 (handle_request): Registration from '<sip:[EMAIL PROTECTED]>' failed for '192.168.1.70'
I've seen this in only two cases:
1) when the SIP user ID, the Authenticate ID (on the GS) and the extension name in sip.conf are not all the same, in your case, 206. The user name in sip.conf doesn't matter, and in fact doesent seem to do anything at all with the GS.
2) You are using a secret and the authenticate Password does not match the secret. This does not appear to be relevant to your situation.
You might also check to be sure that the registration option in the GS is turned off, since you are hard coding the IP address. There is a bug in the current GS firmware (supposed to be fixed soon) that sometimes messes up the registration renewal.
You can't use INFO with the GS. * and GS interpret the INFO standard differently. As a result, the GS does multiple digit transmission. Use either inband or the RFC2833 option. INFO will not work no matter what you do.-- Username not entered -- Executing Hangup("SIP/206-7ecb", "") in new stack
Also, if you are hard coding your phone's IP addresses, then the permit option has no meaning.
[206] username=206 context=extensions qualify=yes incominglimit=1 type=friend insecure=yes host=192.168.1.70 permit=192.168.1.0/255.255.255.0 dtmfmode=info canreinvite=no reinvite=no callgroup=1 pickupgroup=1 disallow=all allow=alaw allow=ulaw
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
