Hi Steven,
Thank you for your response. I had tried leaving endpoint phone number blank
but when I tried making an outside call, the Audiocodes seems doen't know where
to pass the call. So I need to assigned numbers. There is no problem for
incoming call aside from not being displayed the Caller ID.
Steven Totaro <[EMAIL PROTECTED]> wrote: I have no experience with AudioCodes
but it seems that you need to have
callerID enabled, leave endpoint phone number blank. Hope this helps.
Maybe some of this info might help:
http://www.voip-info.org/wiki/view/AudioCodes
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ If caller
ID is turn on, then freePBX will only record the receiving number.....not
the line number.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Well, you
can fix this, by using the Routing General settings, Audiocodes allows you
to Prepend the Hunt Group to the number,
You can then use the Manipulation tables, and strip the source number
(tel-->IP) after Routing.
So if u set each Endpoint up to have a different Hunt Group, you can get it
to ID the line.
They also have a x-channel header that can be added for you to look in the
SIP message at.
things that help when dealing with the FXO's
They are designed to work with Analog PSTN lines,
1. Caller ID is usually delivered between the 1st and 2nd ring on these
lines. Also make sure it is enabled in the Supplementary services.
2. For those of you expecting the number to get delivered through to the IP
side when dialing, it won't PBX's and CO's just ring the PSTN line, they
don't deliver the number. Make sure you Enable AutoMatic Dialing in the
Endpoint Settings, and if you want the line in port x to be the number
dialed to the sip side, datafill the number there.
3. Make sure you set up the audiocodes with the proper coder like Ulaw, they
come set to 723 by default which is crap for coders. they can support up to
5 so just datafill them with all the big coders U, A, 729, and whatever else
4. The Advanced Configuration pages have all their Channel settings, make
sure the fax's are set to what the Trixbox supports. Audiocodes by default
does t.38 now. if your pbx isn't set up for it, you need to put the
Audiocodes in a transparent or events mode
If you want the source number from IP to use the same datafilled Endpoint
Port on the PSTN side make sure Endpoint Phone Numbers has that number
datafilled, and then set up a hunt group with source number as the selection
algorithm(5.0). Assign the endpoints to that hunt group. IP to Tel
rouitng route all calls to that group
Endpoint Phone Number
- This will give you the options for either 4 or 8 ports. You do not
need to place anything here. However, it is a good idea to do such to help
you identify
which port the call comes in on; as you can view the reports in
freePBX to identify calls. In my case, since I have four PSTN ports, I used
the last four
digits of the telephone number to identify. Identifying which PSTN
line the call came from only works if you DO NOT have caller id on the line,
or your
turn off caller id. If caller ID is turn on, then freePBX will only
record the receiving number.....not the line number.
Endpoint Settings
- Automatic Dialing - Define a station number located on Asterisk /
Trixbox (ie 101) for all ports
- Caller ID - Allowed ...... turn off if you want to Identify the line
they came in on.
- Detect Caller ID from Tel - Enable
Thanks,
Steve Totaro
>From: Angel Heart
>Reply-To: Asterisk Users Mailing List - Non-Commercial
>Discussion
>To: [EMAIL PROTECTED],Asterisk Users Mailing List - Non-Commercial
>Discussion
>Subject: Re: [asterisk-users] How to resolve CallerID from AudioCodes FXO
>Date: Mon, 26 Feb 2007 19:22:53 -0800 (PST)
>
>Hi José,
>
>I have not resolve this issue yet. I am currently focusing in my newly
>arrived toy (fonebridge2) then after which I will go back to AudioCodes
>Issue.
>
>Still I don't received yet any response from AudioCodes Representative here
>in the Philippines. I had already escalated this to their Regional Office
>in Singapore. But still no reply for almost a month already. I will post
>immediately once I resolve the issue. It is important to us because we
>really need to now where the calls coming from.
>
>Regards
>
>Angel.
>
>
>
>José Luis Gómez wrote: Hello Angel.
>Did you solve this issue?
>I have the same problem.
>Thanks,
> José
>
>El jue, 01-02-2007 a las 01:15 -0800, Angel Heart escribió:
> > Hi,
> >
> > I am using FXO 8 Ports AudioCodes. Asterisk is able to accept incoming
> > & outgoing calls. However, I noticed that the caller ID of the caller
> > coming from the FXO displays its endpoints assigned number and not the
> > actual caller's ID coming from PSTN.
> >
> > Hope someone is using the same scenario and could share on how to
> > resolve the caller ID/Number.
> >
> > Thanks.
> >
> > Angel
> >
> >
> >
> > ______________________________________________________________________
> > Bored stiff? Loosen up...
> > Download and play hundreds of games for free on Yahoo! Games.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>---------------------------------
>Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and
>get things done faster.
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
_________________________________________________________________
Win a Zunemake MSN® your homepage for your chance to win!
http://homepage.msn.com/zune?icid=hmetagline
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
---------------------------------
8:00? 8:25? 8:40? Find a flick in no time
with theYahoo! Search movie showtime shortcut._______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
