> > What do you mean by outbound CallerID Name? So that when calling a > POTS with CallerID service from telco the Name should show up as you > send it? > If the answer to the above is yes, then stop trying to do that. It > won't work, as the name that the POTS subscriber sees is NOT the one > you send, but what the provider of that POTS line sees when the do the > lookup on the name that is listed (usualy) with the number received as > callerid. >
Ah, that clarifies things a bit. So I have to tell my telco what I want to have show up for each callerID number that I send? > On 2/28/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > I there, > > > > I have some trouble to do working caller id name for outgoing calls on > > the PRI we just installed. Caller id name work on incoming calls only. > > Caller id number work on incoming and outgoing calls. > > > > > > The provider, Goup Telecom, said that's in what i'm sending. They said > > that I send the cid name in ascii code and to do it working, I need to > > send it in hex. > > > > So I take some traces but i'm unable to figure where is the problem. > > > > What I see In case that work: incoming call: > > < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52 > > 54 49 4e 20 46 41 58] > > < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16, > > 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ] > > PROTOCOL 1F > > > > What I see in case that doesn't work: outgoing call: > > > [28 05 b1 69 6e 66 6f] > > > Display (len= 5) Charset: 31 [ info ]........ > > > > > > completes traces: > > > > working: > > < [ 02 01 da d6 08 02 02 34 05 04 03 80 90 a2 18 03 a9 83 81 1c 1c 9f > > 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52 54 49 4e 20 > > 46 41 58 1e 02 82 83 6c 0c 21 83 38 31 39 37 38 30 31 32 37 33 70 0b a1 > > 38 31 39 33 34 30 30 39 37 37 ] > > < Informational frame: > > < SAPI: 00 C/R: 1 EA: 0 > > < TEI: 000 EA: 1 > > < N(S): 109 0: 0 > > < N(R): 107 P: 0 > > < 76 bytes of data > > -- ACKing all packets from 106 to (but not including) 107 > > -- Since there was nothing left, stopping T200 counter > > -- Stopping T203 counter since we got an ACK > > -- Nothing left, starting T203 counter > > < Protocol Discriminator: Q.931 (8) len=76 > > < Call Ref: len= 2 (reference 564/0x234) (Originator) > > < Message type: SETUP (5) > > < [04 03 80 90 a2] > > < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > > capability: Speech (0) > > < Ext: 1 Trans mode/rate: 64kbps, > > circuit-mode (16) > > < Ext: 1 User information layer 1: u-Law > (34) > > < [18 03 a9 83 81] > > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 > > Exclusive Dchan: 0 > > < ChanSel: Reserved > > < Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > > < Ext: 1 Channel: 1 ] > > < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52 > > 54 49 4e 20 46 41 58] > > < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16, > > 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ] > > PROTOCOL 1F > > 8B 0001 00 (CONTEXT SPECIFIC [11]) > > A1 0016 (CONTEXT SPECIFIC [1]) > > 02 0001 01 (INTEGER: 1) > > 02 0001 00 (INTEGER: 0) > > 80 000E 49 4E 46 4F 46 4F 52 54 49 4E 20 46 41 58 (CONTEXT SPECIFIC > [0]) > > < [1e 02 82 83] > > < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > > (0) 0: 0 Location: Public network serving the local user (2) > > < Ext: 1 Progress Description: Calling > > equipment is non-ISDN. (3) ] > > < [6c 0c 21 83 38 31 39 37 38 30 31 32 37 33] > > < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > < Presentation: Presentation allowed of > > network provided number (3) '8197801273' ] > > < [70 0b a1 38 31 39 33 34 30 30 39 37 37] > > < Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8193400977' ] > > -- Making new call for cr 564 > > -- Processing Q.931 Call Setup > > -- Processing IE 4 (cs0, Bearer Capability) > > -- Processing IE 24 (cs0, Channel Identification) > > -- Processing IE 28 (cs0, Facility) > > Q.932 Interpretation component is not handled > > Handle Q.932 ROSE Invoke component > > [ Handling operation 0 ] > > Handle Name display operation > > Received caller name 'INFOFORTIN FAX' > > -- Processing IE 30 (cs0, Progress Indicator) > > -- Processing IE 108 (cs0, Calling Party Number) > > -- Processing IE 112 (cs0, Called Party Number) > > q931.c:3294 q931_receive: call 564 on channel 1 enters state 6 (Call > Present) > > Sending Receiver Ready (110) > > > [ 02 01 01 dc ] > > > Supervisory frame: > > > SAPI: 00 C/R: 1 EA: 0 > > > TEI: 000 EA: 1 > > > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > > > N(R): 110 P/F: 0 > > > 0 bytes of data > > -- Restarting T203 counter > > -- Restarting T203 counter > > q931.c:2570 q931_call_proceeding: call 564 on channel 1 enters state 9 > > (Incoming Call Proceeding) > > > [ 00 01 d6 dc 08 02 82 34 02 18 03 a9 83 81 ] > > > Informational frame: > > > SAPI: 00 C/R: 0 EA: 0 > > > TEI: 000 EA: 1 > > > N(S): 107 0: 0 > > > N(R): 110 P: 0 > > > 10 bytes of data > > -- Restarting T203 counter > > Stopping T_203 timer > > Starting T_200 timer > > > Protocol Discriminator: Q.931 (8) len=10 > > > Call Ref: len= 2 (reference 564/0x234) (Terminator) > > > Message type: CALL PROCEEDING (2) > > > [18 03 a9 83 81] > > > > > > > > don't working: > > > > -- Restarting T203 counter > > Stopping T_203 timer > > Starting T_200 timer > > > Protocol Discriminator: Q.931 (8) len=54 > > > Call Ref: len= 2 (reference 13/0xD) (Originator) > > > Message type: SETUP (5) > > > [04 03 80 90 a2] > > > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > > > capability: Speech (0) > > > Ext: 1 Trans mode/rate: 64kbps, > > > circuit-mode (16) > > > Ext: 1 User information layer 1: u-Law > (34) > > > [18 03 a9 83 81] > > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 > > > Exclusive Dchan: 0 > > > ChanSel: Reserved > > > Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > > > Ext: 1 Channel: 1 ] > > > [1e 02 80 83] > > > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > > > (0) 0: 0 Location: User (0) > > > Ext: 1 Progress Description: Calling > > > equipment is non-ISDN. (3) ] > > > [28 05 b1 69 6e 66 6f] > > > Display (len= 5) Charset: 31 [ info ] > > > [6c 0d 21 80 31 38 31 39 33 34 30 33 31 32 38] > > > Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI: > > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > > Presentation: Presentation permitted, user > > > number not screened (0) '18193403128' ] > > > [70 0b a1 38 31 39 35 37 33 30 39 31 33] > > > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: > > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8195730913' ] > > q931.c:2879 q931_setup: call 32781 on channel 1 enters state 1 (Call > > Initiated) > > > > > > Anyone had suggestion/comment welcome. > > > > Thank you ad advance, > > > > Loic > > > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users