benedikt,

* 1.4 does no video codec translation... it is just a pass through so using the same unit on both ends is a plus.  you might try adding this codec too.
     allow=h264
I assume that audio is ok, just no video, right!?

there may be a nat problem, try
     nat=no

I have some video experience but not with x-lite... which version of x-lite are you using?

I would recommend getting the full release of 1.4.1...  and reinstalling over * Now.
daveC


------------------------------
Message: 16
Date: Tue, 13 Mar 2007 22:10:35 +0100
From: Benedikt Franz <[EMAIL PROTECTED]>
Subject: [asterisk-users] Asterisknow with video and X-Lite not quite
	working
To: asterisk-users@lists.digium.com
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hello everyone,

I have previously asked this question on the asterisk-video list, but I 
got directed here.

I have a setup consisting of asterisknow beta4 (not sure if that is 
crucial) and a few clients all running X-Lite 3.0 (not eyebeam) on the 
local network. My computer has a USB-Camera installed, and now I would 
like to do some video calling with it, at least, so that the other user 
can see me.

When I make a call and then click 'Start' (sending video) in the X-Lite 
client, nothing seems to happen on the other side, but here it says that 
a video transmission has begun. According to 'sip show codecs', both the 
h.263 and h.263p codec are supported, and those are also set on either 
X-Lite clients. I have enabled 'canreinvite' for both users as well, but 
still the other user can not see me. I can, however, see the cameras 
view on my computer, so that seems all properly set up.

Could anyone help me sort this out?

Thanks.



------------------------------
 
Building Strong Relationships w/ Intelligent Customer Service
--

Interlocking Business Solutions, LLC
856-380-0894 x5000

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to