FYI, here's the result from Sangoma...
-t-
Hi Todd,
It’s look like issue with your power supply. It’s not providing
enough power to the FXS module. Make sure that power cable is
connected properly to the A200 main board. You can try to swap the
power cable from CD/DVD ROM for temporary testing. You can find
this information at http://wiki.sangoma.com/sangoma-hardware#A200 .
I have also added signaling method for channels in your /etc/
asterisk/zapata.conf .
I received following error in your /var/log/messages
Mar 16 19:43:39 asterisk1 kernel: wanpipe1: Module 2: TIP/RING is
too low on FXS 0!
Mar 16 19:44:11 asterisk1 last message repeated 2 times
Mar 16 19:44:44 asterisk1 last message repeated 2 times
Mar 16 19:44:44 asterisk1 kernel: wanpipe1: Module 2: FXS failed!
Mar 16 19:45:13 asterisk1 kernel: wanpipe1: Module 3: TIP/RING is
too low on FXS 0!
Best regards,
On Mar 15, 2007, at 4:38 PM, Todd H wrote:
Hi -
I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I
can't make it work- currently, asterisk will not startup because of
a bad module. Below are some log files/config files. If anyone
has any suggestions, I'd appreciate it.
I used Trixbox 2.0 and followed instructions on (http://
sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no problems
running through or compiling. I also downloaded trixbox 2.0
with sangoma drivers included directly from sangoma (http://
wiki.sangoma.com/Trixbox-1xx). I know how this list feels about
trixbox, but still, the card/configs are the same, no? Any advice
is appreciated.
thanks
Todd
+++++++++++++++++++++++ /var/log/asterisk/full++++++++
Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so]Mar 15
16:12:37 VERBOSE[31964] logger.c: [chan_mgcp.so] => (Media Gateway
Control Protocol (MGCP))
Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_local.so]Mar 15
16:12:37 VERBOSE[31964] logger.c: [chan_local.so] => (Local Proxy
Channel)
Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_phone.so]Mar 15
16:12:37 VERBOSE[31964] logger.c: [chan_phone.so] => (Linux
Telephony API Support)
Mar 15 16:12:37 VERBOSE[31964] logger.c: [chan_zap.so]Mar 15
16:12:37 VERBOSE[31964] logger.c: [chan_zap.so] => (Zapata
Telephony w/PRI)
Mar 15 16:12:37 WARNING[31964] chan_zap.c: Unable to specify
channel 1: No such device or address
Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to open channel 1:
No such device or address
here = 0, tmp->channel = 1, channel = 1
Mar 15 16:12:37 ERROR[31964] chan_zap.c: Unable to register channel
'1'
Mar 15 16:12:37 WARNING[31964] loader.c: chan_zap.so: load_module
failed, returning -1
Mar 15 16:12:37 WARNING[31964] loader.c: Loading module chan_zap.so
failed!
[EMAIL PROTECTED] ~]#
+++++++++++++++++++++++ END /var/log/asterisk/full++++++++
+++++++++++++++++++++++ /var/log/messages++++++++
[EMAIL PROTECTED] ~]# tail -20 /var/log/messages
Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_config.so] => (Text
Extension Configuration)
Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_functions.so] =>
(Builtin dialplan functions)
Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_ael.so] => (Asterisk
Extension Language Compiler)
Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_dundi.so] =>
(Distributed Universal Number Discovery (DUNDi))
Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_loopback.so] =>
(Loopback Switch)
Mar 15 16:24:08 asterisk1 safe_asterisk: [pbx_spool.so] =>
(Outgoing Spool Support)
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_iax2.so] => (Inter
Asterisk eXchange (Ver 2))
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_agent.so] => (Agent
Proxy Channel)
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_skinny.so] =>
(Skinny Client Control Protocol (Skinny))
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_h323.so] =>
(Objective Systems H323 Channel)
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_sip.so] => (Session
Initiation Protocol (SIP))
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_features.so] =>
(Feature Proxy Channel)
Mar 15 16:24:08 asterisk1 safe_asterisk: [skipping chan_oss.so]
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_mgcp.so] => (Media
Gateway Control Protocol (MGCP))
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_local.so] => (Local
Proxy Channel)
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_phone.so] => (Linux
Telephony API Support)
Mar 15 16:24:08 asterisk1 safe_asterisk: [chan_zap.so] => (Zapata
Telephony w/PRI)
Mar 15 16:24:08 asterisk1 safe_asterisk: Asterisk died with code 1.
Mar 15 16:24:08 asterisk1 safe_asterisk: Automatically restarting
Asterisk.
Mar 15 16:24:08 asterisk1 asterisk: safe_asterisk startup succeeded
[EMAIL PROTECTED] ~]#
+++++++++++++++++++++++ END /var/log/messages++++++++
++++++++++++++++++++++/etc/zaptel.conf+++++++++++++++
[EMAIL PROTECTED] ~]# more /etc/zaptel.conf
# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not
hand edit
# Zaptel Channels Configurations (zaptel.conf)
#
loadzone=us
defaultzone=us
# Sangoma A200 [slot:9 bus:1 span: 1]
fxsks=1
fxsks=2
fxoks=3
fxoks=4
[EMAIL PROTECTED] ~]#
++++++++++++++++++++++END /etc/zaptel.conf+++++++++++++++
++++++++++++++++++++++/etc/asterisk/zapata.conf+++++++++++++++
[EMAIL PROTECTED] asterisk]# more zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf
[EMAIL PROTECTED] asterisk]#
++++++++++++++++++++++END /etc/asterisk/zapata.conf+++++++++++++++
++++++++++++++++++++++/etc/asterisk/zapata-auto.conf++++++++++++++
; Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not
hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is
intended
; to be #include-d by /etc/zapata.conf that will include the global
settings
;
callerid=asreceived
;Sangoma A200 [slot:9 bus:1 span: 1]
context = from-zaptel
group = 0
signalling = fxs_ks
channel => 1
context = from-zaptel
group = 0
signalling = fxs_ks
channel => 2
context = from-internal
group = 1
signalling = fxo_ks
channel => 3
context = from-internal
group = 1
signalling = fxo_ks
channel => 4
++++++++++++++++++++++/etc/asterisk/zapata-auto.conf++++++++++++++
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
