Hi Steve,
thank you for your help, I set up the call-limit parameter and SNOM
light are working good for ringing and busy status. I took a look at
sip.conf.sample but nothing about unavailable status. Should I set some
other parameter or there is some "trick"? Consider that my firmware
phone is updated to the last available version.
TIA
Giorgio Incantalupo
Steve Murphy wrote:
On Thu, 2007-03-15 at 15:33 +0100, Giorgio Incantalupo wrote:
Hi,
I'm testing Asterisk 1.4.1 with Snom phones but leds are not working to
show which devices are busy/not connected. The same phone worked with
Asterisk 1.2.9.1.
I would appreciate anyone who knows how to setup Asterisk 1.4.1 to
behave as 1.2.9.1.
Giorgio--
That's a pretty generic question! But that aside, there's been a
substantive change in the configs for SIP phones, that could easily
affect your device state monitoring.
So, suggestion: read the example sip config file in the src/configs dir,
pay close attention to stuff like call-limit, the limitonpeers stuff,
etc, and then make sure you update all your phone entries in sip.conf.
Restart asterisk, or reload sip, and hopefully your lights will work.
In general, EVERYONE, here's some advise: When you
upgrade from version "1.x" to "1.(x+2)", always review ALL
your config files against the new config file examples.
Things change! Hopefully, for the better!
murf
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users