Thanks for the quick response but getting the cards to work with Asterisk is not the problem - what I want is for them to show up in asterisk-gui.
For example, I have a little test system sitting here. It has Fedora6, Zaptel/Libpri/Asterisk 1.4 and asterisk-gui. It has an analog card installed but the gui can not detect the analog ports. So I can not use those ports from asterisk-gui. I can manually configure them just fine and they work - but I can not access them in the asterisk-gui. I know this is not a digital card but it is the same problem - asterisk-gui can not detect the card so I need to somehow force the card into the configuration. Is there a way to manually configure the system so that ports that the gui normally could not detect would be available? Thanks again, -Brian -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Friday, March 23, 2007 10:45 AM To: [EMAIL PROTECTED]; asterisk-users@lists.digium.com Subject: RE: [asterisk-users] AsteriskNow Beta 4 with T1 Cards? brian, try these links: http://www.voip-info.org/wiki/view/Asterisk+config+zapata.conf http://www.voip-info.org/wiki/view/Asterisk+PRI daveC _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users