Hi Guys
I'm configuring a TE212P card and have the following two entries in my
/etc/asterisk/zapata.conf
switchtype=dms100
signalling=pri_cpe
When I reload asterisk I get the following messages:
-- Reloading module 'chan_zap.so' (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
[Mar 30 17:48:42] WARNING[2985]: chan_zap.c:11072 process_zap:
Ignoring switchtype
[Mar 30 17:48:42] WARNING[2985]: chan_zap.c:11072 process_zap:
Ignoring signalling
However pri show span 1 shows the right values set for both:
ast1*CLI> pri show span 1
Primary D-channel: 24
Status: Provisioned, In Alarm, Down, Active
Switchtype: Nortel DMS100
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T309 Timer: -1
T313 Timer: 4000
N200 Counter: 3
Should I be concerned as to the Warnings ? I'm not quite at the stage
where I can test my setup yet and wanted to check before I get there.
Many thanks for your time.
Simon
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
