johnny_xing wrote:
hi, everyone,
i have been sufferred for the asterisk hang on problem for so long and i
just reinstalled the whole thing yesterday, but again this morning the
server hangs on again, you could not call in through PSTN line and the ppl
also could not call out throught the server, there is simply engaged dial
tone when you try to do so. and the only thing i can do is to restart
asterisk server after some hours or one day. i am using asterisk 1.2.17 +
zaptel 1.2.16 + freepbx 2.2.1.
Any one please give me some advice on this? thanks so much really, or how I
can monitor and debug the problems when I happened again next time.
My guess would be that you have a hardware issue. Either a bad piece of
hardware or a hardware compatibility issue. Check the output of "cat
/proc/interrupts" to make sure you don't have any IRQ sharing. I have
personally not had good luck with Digium analog cards, but most people
seem to use then without issue.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
