We are looking at about 200 total phones with low usage. Probably only 20 or so calls at once.
On 4/11/07, Andrew Joakimsen <[EMAIL PROTECTED]> wrote:
On 4/11/07, Forrest Beck <[EMAIL PROTECTED]> wrote: > 2) Have two servers with the same dialplan. One in each location. > Each server has it's own TDM cards installed. Phones on Site A will > register with the server on Site A, and phones on Site B will register > with the server on Site B. Then using Polycom phones, they will > failover to using the server not on their site, if their primary isn't > available. I have setup scripts to copy the dialplan from one server > to the other then reload asterisk nightly. The biggest Con to this is > I have to be sure my dialplans don't get different. The user's > voicemail wouldn't be available until their primary server is back up, > but that's OK. Now you said you had two machines with the same dialplans. What happens when you go into fail over an someone leaves a voice message and it gets stuck on the other server? I think the key here is to treat functions as a cluster. IVRs, voicemail, phone calls, etc you need to have a redundant solution for each, not just a spare or redundant asterisk server. Then again you could be working on a small scale project where what I describe its not really important. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- *** Forrest Beck IAXTEL: 17002871718 [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users