The quick way to check if a user is defined is to go to the asterisk console and type "sip show users" which will list all the defined users and passwords.
You say that it isn't a networking issue, but the fact that you are behind a NAT (your local ip is 192.168.0.100) is causing the problem (i think). All of your packets are reaching the server, but when it tries to respond it is sending the packets to 192.168.0.100 which is (obviously) not what you want to happen. The solution to this (typically) is to add "NAT=yes" to sip.confin the general section. Give that a try and see what your result is. Nick On 4/13/07, Alex Balashov <[EMAIL PROTECTED]> wrote:
On Fri, 13 Apr 2007, Manolet Gmail said something to this effect: > mmm are you sure that asterisk-gui generate it on the sip.conf file? > cause i see a new file called users.conf, and i can see the sip users > on it. Anybody uses asterisk now and can check it please?? Hmm. I use 1.4.x here and installed the stock config file samples bundle, and there's no trace of users.conf. But then again, I have never used any GUI configurator, so I'm not in the best position to know what sort of structure and metadata it generates. -- Alex Balashov <[EMAIL PROTECTED]> _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
