Yes, As I have mentioned below I tried the link http://bugs.digium.com/view.php?id=6683&nbn=24 but was not able to make it work.
Regards, Sanjay Rajdev ----- Original Message ----- From: "Steve Murphy" <[EMAIL PROTECTED]> To: "sanjay rajdev" <[EMAIL PROTECTED]> Sent: Thursday, April 19, 2007 4:37:39 AM (GMT+0530) Asia/Calcutta Subject: Re: [asterisk-users] BSNL caller ID (India) Sanjay-- Did you look at bug 6683? Sorry, I haven't reviewed all the messages on this thread. murf On Wed, 2007-04-18 at 01:01 +0530, Sanjay Rajdev wrote: > Tzafrir, > > Can you Please let me know if the zapata.conf below is correct, or do I have > to change something. > > Regards, > Sanjay Rajdev > > ----- Original Message ----- > From: "Sanjay Rajdev" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <asterisk-users@lists.digium.com> > Cc: "tzafrir cohen" <[EMAIL PROTECTED]> > Sent: Tuesday, April 17, 2007 3:38:16 AM (GMT+0530) Asia/Calcutta > Subject: Re: [asterisk-users] BSNL caller ID (India) > > Yes below is the zapata.conf > > [trunkgroups] > > [channels] > context=incoming > usecallerid=yes > cidsignalling=dtmf > cidstart=ring > hidecallerid=no > callerid=asreceived > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > > ;Sangoma A200 [slot:2 bus:4 span:1] > group=0 > signalling = fxs_ks > channel => 1 > > group=0 > signalling = fxs_ks > channel => 2 > > group=0 > signalling = fxs_ks > channel => 3 > > group=0 > signalling = fxs_ks > channel => 4 > > > Regards, > Sanjay Rajdev > > > > ----- Original Message ----- > From: "Tzafrir Cohen" <[EMAIL PROTECTED]> > To: asterisk-users@lists.digium.com > Sent: Tuesday, April 17, 2007 2:40:32 AM (GMT+0530) Asia/Calcutta > Subject: Re: [asterisk-users] BSNL caller ID (India) > > On Mon, Apr 16, 2007 at 11:18:46PM +0530, Sanjay Rajdev wrote: > > Has anyone figured out the way of getting the caller id for BSNL on > > Asterisk 1.4.2 > > I have tried following link > > http://bugs.digium.com/view.php?id=6683&nbn=24 > > but was not able to get it, although did not ge any error too. > > > > I always get the caller id as asterisk. > > Hmmm... are you sure you have configured your system to get callerid > from the PSTN? > > callerid=asrecieved > > in zapata.conf. > -- Steve Murphy <[EMAIL PROTECTED]> Digium _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users