Sorry bringing it up again.... Meanwhile switched to asterisk 1.4.3 on fbsd-6.2 but still no luck getting my 7970G to run via skinny...
It registers fine with *: Adding button: 9, 1 Device capability set to '268' asterisk*CLI> skinny show devices Name DeviceId IP Type R NL -------------------- ---------------- --------------- --------------- - -- cisco SEP00175A872053 xx.xx.xxx.xx 7970 Y 1 But on the phone I just see displayed the time and date but no linelabel... My skinny.conf is: [general] bindaddr=xx.xx.xxx.xx ; Address to bind to bindport=2000 ; Port to bind to, default tcp/2000 dateformat=D.M.Y ; M,D,Y in any order (5 chars max) keepalive=30 disallow=all allow=all ; see doc/rtp-packetization for framing options [cisco] device=SEP00175A872053 model=7970 nat=1 callerid="Richard Klingler" <995> mailbox=995 callwaiting=yes transfer=yes threewaycalling=yes context=klingler linelabel="phonelab" line => 995 any ideas left? Using now "cmterm-7970_7971-sccp.8-2-2SR1" cheers rick _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users