On Mon, Apr 30, 2007 at 12:25:07PM -0500, Diego Quintana Cruz wrote:
> Hi all,
> I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything
> seems nice, but i'm not able to make calls nor to receive any. When I
> try to make a call, I keep receiven the "all circuits are busy now"
> message, and when I receive calls, asterisk doesn't seems to care
> (don't get anything on the CLI)
>
> I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's repository
>
> voip:~# asterisk -rx 'zap show status'
> Description Alarms IRQ bpviol
> CRC4
> Wildcard TDM400P REV I Board 1 OK 0 0 0
>
> voip:~# asterisk -rx 'zap show channels'
> Chan Extension Context Language MusicOnHold
> pseudo from-internal es
> 1 from-internal es
> 2 from-internal es
> 3 from-pstn es
> 4 from-pstn es
After some further digging:
it turns out that when there' a problem, the output of the above command
is actually:
>
> voip:~# asterisk -rx 'zap show channels'
> Chan Extension Context Language MusicOnHold
> pseudo from-internal es
> 1 from-internal es
> 2 from-internal es
> 4 from-pstn es
that is: channel 3 has been destroyed.
The logs show:
Apr 30 14:50:53 DEBUG[6003] chan_zap.c: Message status for 401 changed from -1
to 0 on 1
Apr 30 14:51:00 NOTICE[6003] chan_zap.c: Got ZT_EVENT_REMOVED. Destroying
channel 3
Apr 30 14:51:16 DEBUG[6004] chan_sip.c: Stopping retransmission on [snipped by
Tzafrir]
This seems to happen when you disconnect an incoming FXO call.
ZT_EVENT_REMOVED is defined to be 20 . That package includes a patch
that has been applied to trunk in rev 58321.
Anybody encountered this in Asterisk/trunk with a wctdm card with an FXO
module?
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
