Unless you're in China, you should advertise you telephone number as:
+1 863 248 1195
Is your provider "Quest" or Qwest? Have you removed the disconnected
numbers from your dial plan?
[EMAIL PROTECTED] wrote:
Sorry for disturbing you, but we have some problems with an installation
with multiple (84) T1s from Quest.
Now, our Problem is disconnected numbers are reported by sending in-
band channel alert message and the B-Channel will have the tri tone and
respective message but the line is never "picked up" and stays in ringing
when dialling. So disconnected numbers are never detected as
disconnected numbers.
We tried this with digium and sangoma cards and the results are the same.
Quest offered us a audible treatment of the line which made things even
worse and would block the B-Channel for playing the message without
asterisk being aware that the channel is still used.
Otherwise we have a huge problem with congestion due to unavailable B-
Channels when the number of connections in asterisk does not match the
number of used channels / channels stay blocked after they have been
hung up for several seconds, again this seems to be mostly the problems
when b-channels carry audible alert messages.
Thanks for any good suggestions!
Frank Gorgas-Waller
Explido Software USA Inc.
Phone +863-248-1195 & Fax +863-248-1155
EMail [EMAIL PROTECTED] & ICQ 7733546
--QQ-------------------------------------------------------------
We teach penguin to fly http://www.explido.us
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
