Hello list,
hope someone can help me - I'm going crazy using the FXO port a SPA3012.
I would like the SPA 3012 to act as a simple FXO port to an Asterisk, that
is, once it detects a call, it should simply send it over to the local
Asterisk server. No intelligent routing, PIN, anything else....
I configured it like this:
PSTN-To-VoIP Gateway Setup
PSTN-To-VoIP Gateway Enable: yes
PSTN Caller Auth Method: none
PSTN Ring Thru Line 1: no
PSTN Caller Default DP: 1
Then I configured the dialplan #1 as:
Dial Plan 1: (S0<:@gw1>)
And I configured gateway 1 as:
Gateway Accounts
Gateway 1: my.asterisk.server
GW1 NAT Mapping Enable: no
GW1 Auth ID: --my-sip-login--
GW1 Password: --my-sip-password--
But it seems to simply ignore incoming calls at all....
Anybody's got a pointer to get me started?
Thanks in advance,
l.
--
Home of QueueMetrics - http://queuemetrics.com
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
