Alvin Austin wrote: > Hi everyone, I have a user that needs a little extra volume on his > Polycom IP 601 phone set for all calls (beyond what the volume control > currently offers). Is there a provisioning setting for this anywhere? > (I'd like to avoid a separate amplifier between the phone and handset if > possible.)
If you read the SIP administrator's guide plus any addenda for the current firmware, you can see the parameters for setting the headset gain. Different phones have different keys, which is why you'll need to look at the docs. In short, this can definitely be tweaked in the phone. You can set handset, headset, and chassis gain settings; these go over and above the manual control available on the phone's panel. It should be noted that Polycom actually recommends against using headsets without amplifiers. This is a common complaint with Polycom users. You'll probably be better off with an amplifier. -Stephen- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users