Are you sure that you set the T1/E1 jumpers on the board correctly for
E1 mode?
Matthew Fredrickson
On May 15, 2007, at 1:23 PM, Matt Brown wrote:
Hi,
I have purchased a TE212P (Dual Span) Digium card and have compiled
Zaptel 1.4.2.1 and LibPri 1.4.0 and Asterisk 1.4.4
ztcfg -vv shows this:
Zaptel Version: 1.4.2.1
Echo Canceller: MG2
Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
Channel 32: Clear channel (Default) (Slaves: 32)
Channel 33: Clear channel (Default) (Slaves: 33)
Channel 34: Clear channel (Default) (Slaves: 34)
Channel 35: Clear channel (Default) (Slaves: 35)
Channel 36: Clear channel (Default) (Slaves: 36)
Channel 37: Clear channel (Default) (Slaves: 37)
Channel 38: Clear channel (Default) (Slaves: 38)
Channel 39: Clear channel (Default) (Slaves: 39)
Channel 48: D-channel (Default) (Slaves: 48)
40 channels configured.
/etc/zaptel.conf consists of:
# Config for a UK Euro-ISDN line
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
span=2,1,0,ccs,hdb3,crc4
bchan=32-39
dchan=48
loadzone=uk
defaultzone=uk
and /etc/asterisk/zapata.conf consists of:
[channels]
callprogress=no
usecallerid=yes
language=en
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
immediate=no
pridialplan=unknown
overlapdial=yes
signalling=pri_cpe
switchtype=euroisdn
usecallingpres=yes
group=1
context=incoming
busydetect=no
resetinterval=never
channels => 1-15,17-31,32-39
The red light on Span 1 & Span is flashing and both are showing RED
alarms ??
What am I doing wrong ?
I have successfully built other Asterisk boxes with different cards in
without problems - this is an upgrade for a client.
It is being connected to a UK ISDN30 circuit at the weekend 1 with 30
lines the other with 8 lines (38 Lines in total)
Any help would be really, really appreciated.
Regards
Matt Brown
[EMAIL PROTECTED]
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users