On Thu, May 17, 2007 at 11:47:25AM +0200, Antonio Martínez Contreras wrote: > Hello everybody, and first of all sorry for my poor English. > > I'm having trouble with Quadbri installed on Asterisk > 1.2.17-BRIstuffed-0.3.0-PRE-1y-e. Everything is working fine, except > calling to switched off or "out of coverage" cell phones. In this case I > have to wait 40 seconds until Asterisk tell me that "all circuits are busy > now" instead of receive cell phone company message of "The cell phone you > are calling is unavailable". We tried a lot of configurations in > zapata.conf and zaptel.conf, but we still have the same problem. I show my > config: > > zapata.conf: > > ================================= > ; > ; Zapata telephony interface > ; > ; Configuration file > > [trunkgroups] > > [channels] > > language=es > > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > group=1 > echocancel=yes > echocancelwhenbridged=yes > echotraining=800 > immediate=no > > switchtype=euroisdn > signalling=bri_cpe_ptmp > pridialplan=unknown > prilocaldialplan=unknown > priindication=outofband > facilityenable=yes > relaxdtmf=yes > context=from-zaptel > rxgain=0.0 > txgain=0.0 > channel => 1,2 > > faxdetect=incoming > > ;Include genzaptelconf configs > #include zapata-auto.conf > > #group=1 > > ;Include AMP configs > #include zapata_additional.conf
Could you please provide those two files (zapata_additional.conf and zapata-auto.conf )? > > > > ;Include BRI-HFC configs > #include zapata-BRI-HFC.conf > > =============================== > > zaptel.conf > > =============================== > > # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit > # Zaptel Configuration File > # > # This file is parsed by the Zaptel Configurator, ztcfg > # > > # It must be in the module loading order > > > # Global data > > loadzone = es > defaultzone = es > > # HFC CARD NOTE: > # When run for the first time the card numbers start from 1 > # When run subsequently the card numbers start from 0 > # Go figure! > > > # Span 1: ztqoz/2/1 "quadBRI PCI ISDN Card 1 Span 1 [TE]" > span=1,1,3,ccs,ami > bchan=1-2 > dchan=3 > > > # Span 2: ztqoz/2/2 "quadBRI PCI ISDN Card 1 Span 2 [TE]" > #span=2,0,3,ccs,ami > #bchan=4-5 > #dchan=6 > > > # Span 3: ztqoz/2/3 "quadBRI PCI ISDN Card 1 Span 3 [TE]" > #span=3,0,3,ccs,ami > #bchan=7-8 > #dchan=9 > > > # Span 4: ztqoz/2/4 "quadBRI PCI ISDN Card 1 Span 4 [TE]" > #span=4,0,3,ccs,ami > #bchan=10-11 > #dchan=12 > > =============================== > > In channel debug I have: > > Debugging on new channels is enabled > > -- Executing Macro("SIP/200-09fc1698", "dialout-trunk|2|637574972||") in > new stack > > -- Executing Set("SIP/200-09fc1698", "DIAL_TRUNK=2") in new stack > > -- Executing Set("SIP/200-09fc1698", "_NODEST=") in new stack > > -- Executing Set("SIP/200-09fc1698", "DIAL_NUMBER=637574972") in new > stack > > -- Executing Set("SIP/200-09fc1698", "ROUTE_PASSWD=") in new stack > > -- Executing Set("SIP/200-09fc1698", "DIAL_TRUNK_OPTIONS=tr") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?noauth") in new stack > > -- Goto (macro-dialout-trunk,s,8) > > -- Executing Set("SIP/200-09fc1698", "GROUP()=OUT_2") in new stack > > -- Executing Macro("SIP/200-09fc1698", "user-callerid|SKIPTTL") in new > stack > > -- Executing NoOp("SIP/200-09fc1698", "user-callerid: device 200") in > new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?report") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?start") in new stack > > -- Executing Set("SIP/200-09fc1698", "REALCALLERIDNUM=200") in new stack > > -- Executing NoOp("SIP/200-09fc1698", "REALCALLERIDNUM is 200") in new > stack > > -- Executing Set("SIP/200-09fc1698", "AMPUSER=200") in new stack > > -- Executing Set("SIP/200-09fc1698", "AMPUSERCIDNAME=200") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?report") in new stack > > -- Executing Set("SIP/200-09fc1698", "CALLERID(all)=200 <200>") in new > stack > > -- Executing Set("SIP/200-09fc1698", "REALCALLERIDNUM=200") in new stack > > -- Executing NoOp("SIP/200-09fc1698", "TTL: ARG1: SKIPTTL") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?continue") in new stack > > -- Goto (macro-user-callerid,s,21) > > -- Executing NoOp("SIP/200-09fc1698", "Using CallerID "200" <200>") in > new stack > > -- Executing Macro("SIP/200-09fc1698", "record-enable|200|OUT") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?2:4") in new stack > > -- Goto (macro-record-enable,s,4) > > -- Executing DeadAGI("SIP/200-09fc1698", > "recordingcheck|20070517-111347|asterisk-2589-1179393227.3") in new stack > > -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck > > recordingcheck|20070517-111347|asterisk-2589-1179393227.3: Outbound > recording not enabled > > -- AGI Script recordingcheck completed, returning 0 > > -- Executing NoOp("SIP/200-09fc1698", "No recording needed") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?skipoutcid") in new stack > > -- Executing Set("SIP/200-09fc1698", "DIAL_TRUNK_OPTIONS=r") in new > stack > > -- Executing Macro("SIP/200-09fc1698", "outbound-callerid|2") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?start") in new stack > > -- Goto (macro-outbound-callerid,s,3) > > -- Executing NoOp("SIP/200-09fc1698", "REALCALLERIDNUM is 200") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?normcid") in new stack > > -- Goto (macro-outbound-callerid,s,9) > > -- Executing Set("SIP/200-09fc1698", "USEROUTCID=") in new stack > > -- Executing Set("SIP/200-09fc1698", "EMERGENCYCID=") in new stack > > -- Executing Set("SIP/200-09fc1698", "TRUNKOUTCID="CITY LOGO" > <965245915>") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?trunkcid") in new stack > > -- Goto (macro-outbound-callerid,s,16) > > -- Executing GotoIf("SIP/200-09fc1698", "0?usercid") in new stack > > -- Executing Set("SIP/200-09fc1698", "CALLERID(all)="CITY LOGO" > <965245915>") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?report") in new stack > > -- Goto (macro-outbound-callerid,s,22) > > -- Executing NoOp("SIP/200-09fc1698", "CallerID set to "CITY LOGO" > <965245915>") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?nomax") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?chanfull") in new stack > > -- Executing DeadAGI("SIP/200-09fc1698", "fixlocalprefix") in new stack > > -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix > > -- AGI Script fixlocalprefix completed, returning 0 > > -- Executing Set("SIP/200-09fc1698", "OUTNUM=637574972") in new stack > > -- Executing Set("SIP/200-09fc1698", "custom=ZAP/1") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?customtrunk") in new stack > > -- Executing Dial("SIP/200-09fc1698", "ZAP/1/637574972|300|r") in new > stack > > -- Requested transfer capability: 0x00 - SPEECH > > -- Called 1/637574972 > > -- Zap/1-1 is proceeding passing it to SIP/200-09fc1698 > > -- Zap/1-1 is making progress passing it to SIP/200-09fc1698 > > -- Channel 0/1, span 1 got hangup request > > -- Channel 0/1, span 1 received AOC-E charging 0 units > > -- Hungup 'Zap/1-1' > > == Everyone is busy/congested at this time (1:0/0/1) > > -- Executing Goto("SIP/200-09fc1698", "s-CHANUNAVAIL|1") in new stack > > -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) > > -- Executing NoOp("SIP/200-09fc1698", "Dial failed due to CHANUNAVAIL - > failing through to other trunks") in new stack > > -- Executing Macro("SIP/200-09fc1698", "dialout-trunk|1|637574972||") in > new stack > > -- Executing Set("SIP/200-09fc1698", "DIAL_TRUNK=1") in new stack > > -- Executing Set("SIP/200-09fc1698", "_NODEST=") in new stack > > -- Executing Set("SIP/200-09fc1698", "DIAL_NUMBER=637574972") in new > stack > > -- Executing Set("SIP/200-09fc1698", "ROUTE_PASSWD=") in new stack > > -- Executing Set("SIP/200-09fc1698", "DIAL_TRUNK_OPTIONS=tr") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?noauth") in new stack > > -- Goto (macro-dialout-trunk,s,8) > > -- Executing Set("SIP/200-09fc1698", "GROUP()=OUT_1") in new stack > > -- Executing Macro("SIP/200-09fc1698", "user-callerid|SKIPTTL") in new > stack > > -- Executing NoOp("SIP/200-09fc1698", "user-callerid: CITY LOGO > 965245915") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?report") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?start") in new stack > > -- Goto (macro-user-callerid,s,5) > > -- Executing NoOp("SIP/200-09fc1698", "REALCALLERIDNUM is 200") in new > stack > > -- Executing Set("SIP/200-09fc1698", "AMPUSER=200") in new stack > > -- Executing Set("SIP/200-09fc1698", "AMPUSERCIDNAME=200") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?report") in new stack > > -- Executing Set("SIP/200-09fc1698", "CALLERID(all)=200 <200>") in new > stack > > -- Executing Set("SIP/200-09fc1698", "REALCALLERIDNUM=200") in new stack > > -- Executing NoOp("SIP/200-09fc1698", "TTL: ARG1: SKIPTTL") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?continue") in new stack > > -- Goto (macro-user-callerid,s,21) > > -- Executing NoOp("SIP/200-09fc1698", "Using CallerID "200" <200>") in > new stack > > -- Executing Macro("SIP/200-09fc1698", "record-enable|200|OUT") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?2:4") in new stack > > -- Goto (macro-record-enable,s,4) > > -- Executing DeadAGI("SIP/200-09fc1698", > "recordingcheck|20070517-111420|asterisk-2589-1179393227.3") in new stack > > -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck > > recordingcheck|20070517-111420|asterisk-2589-1179393227.3: Outbound > recording not enabled > > -- AGI Script recordingcheck completed, returning 0 > > -- Executing NoOp("SIP/200-09fc1698", "No recording needed") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?skipoutcid") in new stack > > -- Executing Set("SIP/200-09fc1698", "DIAL_TRUNK_OPTIONS=r") in new > stack > > -- Executing Macro("SIP/200-09fc1698", "outbound-callerid|1") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?start") in new stack > > -- Goto (macro-outbound-callerid,s,3) > > -- Executing NoOp("SIP/200-09fc1698", "REALCALLERIDNUM is 200") in new > stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?normcid") in new stack > > -- Goto (macro-outbound-callerid,s,9) > > -- Executing Set("SIP/200-09fc1698", "USEROUTCID=") in new stack > > -- Executing Set("SIP/200-09fc1698", "EMERGENCYCID=") in new stack > > -- Executing Set("SIP/200-09fc1698", "TRUNKOUTCID="CITY LOGO" > <965245915>") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?trunkcid") in new stack > > -- Goto (macro-outbound-callerid,s,16) > > -- Executing GotoIf("SIP/200-09fc1698", "0?usercid") in new stack > > -- Executing Set("SIP/200-09fc1698", "CALLERID(all)="CITY LOGO" > <965245915>") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?report") in new stack > > -- Goto (macro-outbound-callerid,s,22) > > -- Executing NoOp("SIP/200-09fc1698", "CallerID set to "CITY LOGO" > <965245915>") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?nomax") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?chanfull") in new stack > > -- Executing DeadAGI("SIP/200-09fc1698", "fixlocalprefix") in new stack > > -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix > > -- AGI Script fixlocalprefix completed, returning 0 > > -- Executing Set("SIP/200-09fc1698", "OUTNUM=637574972") in new stack > > -- Executing Set("SIP/200-09fc1698", "custom=ZAP/2") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "0?customtrunk") in new stack > > -- Executing Dial("SIP/200-09fc1698", "ZAP/2/637574972|300|r") in new > stack > > -- Requested transfer capability: 0x00 - SPEECH > > -- Called 2/637574972 > > -- Zap/2-1 is proceeding passing it to SIP/200-09fc1698 > > -- Zap/2-1 is making progress passing it to SIP/200-09fc1698 > > -- Channel 0/2, span 1 got hangup request > > -- Channel 0/2, span 1 received AOC-E charging 0 units > > -- Hungup 'Zap/2-1' > > == Everyone is busy/congested at this time (1:0/0/1) > > -- Executing Goto("SIP/200-09fc1698", "s-CHANUNAVAIL|1") in new stack > > -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) > > -- Executing NoOp("SIP/200-09fc1698", "Dial failed due to CHANUNAVAIL - > failing through to other trunks") in new stack > > -- Executing Macro("SIP/200-09fc1698", "outisbusy|") in new stack > > -- Executing Playback("SIP/200-09fc1698", > "all-circuits-busy-now|noanswer") in new stack > > -- Playing 'all-circuits-busy-now' (language 'es') > > -- Executing Playback("SIP/200-09fc1698", "pls-try-call-later|noanswer") > in new stack > > -- Playing 'pls-try-call-later' (language 'es') > > -- Executing Macro("SIP/200-09fc1698", "hangupcall") in new stack > > -- Executing ResetCDR("SIP/200-09fc1698", "w") in new stack > > -- Executing NoCDR("SIP/200-09fc1698", "") in new stack > > -- Executing GotoIf("SIP/200-09fc1698", "1?skiprg") in new stack > > -- Goto (macro-hangupcall,s,6) > > -- Executing GotoIf("SIP/200-09fc1698", "1?theend") in new stack > > -- Goto (macro-hangupcall,s,9) > > -- Executing Wait("SIP/200-09fc1698", "5") in new stack > > -- Executing Hangup("SIP/200-09fc1698", "") in new stack > > > > I'm getting crazy with this issue, so I hope one of you could help me. > > > > Thanks a lot for your uninterested help to Asterisk-Users!! > > > > Bye. > > _________________________________________________________________ > Moda para esta temporada. Ponte al día de todas las tendencias. > http://www.msn.es/Mujer/moda/default.asp > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users