On Fri, 28 Nov 2003 18:15:38 +0100, Peer Oliver schmidt wrote > David M. Wilson wrote: > > > Hi there! > > > > I'm currently considering various PBX solutions for our office telephone > > network, and would very much like to use Asterisk. Currently, my > > research is incomplete. I have been recommended to use the above cards, > > but it is unclear from my Googling whether my configuration will work: > > > > - 3x Fritz!Card PCI's in one host. > > As far as I know, AVM only allows a single Fritz!Card PCI in > a PC. I /think/ there is a patch out there to allow more > than one. Search the archives to find out more. > > I am sure, you will get better results by putting in an > active card. Either AVM or EICON. I have /heard/ the EICON > cards are preferable because of the on board echo cancellation > -- > Best regards > > Peer Oliver Schmidt > the internet company
I'm using two Fritz!Cards in one box without any problems (yes, a patch was required iirc but I found it quite easily via google... somewhere on isdn4linux.de methinks). It works as a router/nat, iax->pstn gateway, mail server, nfs (/home) and smb file server and php+mysql app server for about a dozen clients. It worked for quite a time on a p2/400 but we're currently moving it to a celeron/1700 as the db is getting bigger. No asterisk related problems whatever, except for dead channels left sometimes (to clear them reliably, we need to shut down * and restart it). My 0.02PLN Grzegorz Nosek _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
