We've got a bunch of Linksys 941/942s and have them all configured to upgrade the config periodically. Problem is, when the phone loads a new config it goes through what appears to be a soft reboot, although it only takes about 5 seconds. During this time, the display goes blank and the (normally) green line buttons flash off briefly. This is a minor nuisance and elicites questions and complaints from users. But, worse, is that when the phone goes through this recycle, the red MWI light comes on. About 95% of the time, it eventually goes off by itself, but occassionally it takes a power cycle to do it. We are running the latest Linksys firwmare.
My question is this. Has anyone else experienced this problem and if so, what have you done about it? I can't believe we're alone, as there must be a bezillion of these phones connected to Asterisk systems. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users