On Wed, 20 Jun 2007, [EMAIL PROTECTED] wrote: > Is it possible to force the Dial function to skip to the next priority if it > doesn't find the server of the called contact within a few seconds? > > I know I can use: > Dial(Technology/resource[&Tech2/resource2...][|timeout][|options][|URL]) > where I can use some short timeout in the "timeout" option, but if I do so, > when some call is well succeeded, it will only ring for that time!
I think you basically have to pick one or the other. Either set a long timeout (15-30 sec, e.g. Dial(SIP/whatever,20) or don't use this feature. The good news is that if the destination SIP server is actually unreachable, Dial() should return almost instantly, at which point it should jump to the failure priority. -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : +1-678-954-0670 Direct : +1-678-954-0671 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users