Figured it out. I forgot that /etc/zaptel.conf got clobbered during the install. Once I fixed that and ran:
/sbin/ztcfg -vvvv It worked. Zaptel.conf looks like this: loadzone = us defaultzone=us fxoks = 1-2 fxsks = 4 I have 1 FXO module & 2 FXS modules. Thanks for putting me on the right track!! H On 6/30/07, hugolivude <[EMAIL PROTECTED]> wrote: > Thanks for responding Russell! > > > What output do you get if you run "module unload chan_zap.so" > > == Unregistered application 'ZapSendKeypadFacility' > > > and then "module load chan_zap.so" ? > > == Registered application 'ZapSendKeypadFacility' > == Parsing '/etc/asterisk/zapata.conf': Found > [Jun 30 07:46:51] WARNING[12132]: chan_zap.c:903 zt_open: Unable to > specify channel 1: No such device or address > [Jun 30 07:46:51] ERROR[12132]: chan_zap.c:7157 mkintf: Unable to open > channel 1: No such device or address > here = 0, tmp->channel = 1, channel = 1 > [Jun 30 07:46:51] ERROR[12132]: chan_zap.c:10463 build_channels: > Unable to register channel '1' > > Hopefully you'll be able to tell me what the above means! I'm using > the same zapata.comf that I used with 1.2... > > Thanks, > H > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users