Roger Workman
General Manager
PCS: 304-751-6286
Fax: 304-399-0046
ICQ: 4447584
 

This e-mail and attachments, if any, may contain confidential and/or
proprietary information. Please be advised that the unauthorized use or
disclosure of the information is strictly prohibited. If you are not the
intended recipient, please notify the sender immediately by reply e-mail and
delete all copies of this message and attachments. Thank you.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jorge Mendoza
Sent: Wednesday, December 03, 2003 9:09 AM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Asterisk with Voicetronix OpenLine4 card

Try the following:

vpb.conf:
[interfaces]
echocancel = on
board = 1
context = default
mode = fxo
channel = 3

extensions.conf:

exten => _9.,1,Dial(vpb/1-3/${EXTEN:1})
exten => _9.,2,Congestion

Hope help you

Jorge


Ahmad Faiz wrote:

>hi there,
>
>i've been able to successfully run asterisk with the Voicetronix OpenLine4
>card, it can accept calls and function normally. The only problem I'm
>experiencing so far is getting the card to outdial to a third party.
>
>What I'm trying to achieve is basically call bridging, where the caller
>dials in to asterisk, some IVR plays and then attempts to perform a
>"transfer" to a third party, and once the outbound call is connected both
>legs are bridged.
>
>I've seen some dialplans out there that use the normal Dial application. in
>my dialplan i've used various different methods:
>
>exten => s,5,Dial(55555555)
>exten => s,5,Dial(vpb/55555555)
>exten => s,5,Dial(vpb/1-3/55555555)
>
>(the third one is assuming it means board 1 line 3)
>
>in the log file, the following error is recorded each time the outbound
dial
>is attempted:
>
>"File app_dial.c, Line 499 (dial_exec): Unable to create channel of type
>'vpb'"
>
>As far as the vpb.conf file goes, my attempts include:
>
>1) Setting channels 1 and 2 as FXO, channels 3 and 4 as immediate
>2) Setting channels 1 and 2 as FXO, channels 3 and 4 as dialtone
>3) Setting channels 1-4 as FXO
>
>i may have something mixed up here, has anyone had any success with this?
>note that i'm not using the OpenSwitch card, it's the OpenLine.
>
>Thanks,
>Faiz
>  
>


_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to