Sorry I did not realize that your concern was when the line is disconnected, as I didn't bother reading the whole message and as soon as I read that the problem is about LCR I responded not reading even one word further about the disconnected.
On 7/25/07, Vieri <[EMAIL PROTECTED]> wrote: > > --- C F <[EMAIL PROTECTED]> wrote: > > > This should do what you want: > > > > You can call it like this: > > exten => > 12125551212,1,Macro(dialoutbound,${EXTEN},8005551212,3-Zap/G1/-Zap/G2/-Sip/Nufone/) > > > > Hope this helps. > > Thanks but it still won't work when the wires are > disconnected. > This is what I get on the CLI: > > -- Executing Macro("SIP/4053-0823fc18", > "dialoutbound|971847021|8005551212|2-Zap/g0/-Zap/g1/") > in new stack > -- Executing NoOp("SIP/4053-0823fc18", "") in new > stack > -- Executing NoOp("SIP/4053-0823fc18", "") in new > stack > -- Executing NoOp("SIP/4053-0823fc18", "") in new > stack > -- Executing GotoIf("SIP/4053-0823fc18", "0?100") > in new stack > -- Executing Set("SIP/4053-0823fc18", > "CALLERID(num)=8005551212") in new stack > -- Executing Goto("SIP/4053-0823fc18", "10") in > new stack > -- Goto (macro-dialoutbound,s,10) > -- Executing NoOp("SIP/4053-0823fc18", "") in new > stack > -- Executing NoOp("SIP/4053-0823fc18", "Weare > starting to cut") in new stack > -- Executing Set("SIP/4053-0823fc18", "DCNT=2") in > new stack > -- Executing Set("SIP/4053-0823fc18", "CNT=2") in > new stack > -- Executing Goto("SIP/4053-0823fc18", "50") in > new stack > -- Goto (macro-dialoutbound,s,50) > -- Executing NoOp("SIP/4053-0823fc18", "We start > assigning devices") in new stack > -- Executing NoOp("SIP/4053-0823fc18", "") in new > stack > -- Executing Set("SIP/4053-0823fc18", "TCNT=0") in > new stack > -- Executing GotoIf("SIP/4053-0823fc18", "0?800") > in new stack > -- Executing Set("SIP/4053-0823fc18", > "DVC=Zap/g0/") in new stack > -- Executing Set("SIP/4053-0823fc18", "TCNT=2") in > new stack > -- Executing Set("SIP/4053-0823fc18", "CNT=3") in > new stack > -- Executing Goto("SIP/4053-0823fc18", "callme|1") > in new stack > -- Goto (macro-dialoutbound,callme,1) > -- Executing NoOp("SIP/4053-0823fc18", "") in new > stack > -- Executing Dial("SIP/4053-0823fc18", > "Zap/g0/971847021||Ww") in new stack > -- Called g0/971847021 > -- Zap/32-1 answered SIP/4053-0823fc18 > > (endless) > > Another ML subscriber has pointed out that Asterisk is > not capable of detecting if there's dialtone or not. > I find that surprising as I was used to hylafax with > regular modems detecting if there was a CARRIER or > not. > Anyway, I noticed that if the wires are connected but > the analog lines are already busy then subsequent > calls go out through the next trunk. > So the BUSY or CONGESTION signal is detected on an > analog line when connected. > > I just don't know what to do in case the wires get > disconnected without having to change the config > files. > > Thanks anyway. > > Vieri > > > > > ____________________________________________________________________________________Ready > for the edge of your seat? > Check out tonight's top picks on Yahoo! TV. > http://tv.yahoo.com/ > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users