Hi! Thank you all for the info!
But I think I haven't explained my scenario well enough. I am not relaying the calls to SIP. What happens is the following (the scenario is: a call started from an ISDN E1 PBX, through the asterisk, to the PSTN, and was answered by the remote party): 1. A CONNECT comes from the PSTN containing a Display IE (which has info sent by the telco that is used for billing purposes by the PBX) into span 1 of the asterisk. (The telco is emulating an old billing procedure based on an impulse count. This was commonly used in analog lines.) 2. The asterisk relays the call to span 2 (which is connected to the PBX). 3. The CONNECT that is sent from span 2 to the PBX does not have the Display IE. The asterisk strips this IE from the CONNECT message. This is my problem. Is there a way that i can force the asterisk not to strip the Display IE? Thanks and best regards to all, Óscar Patrício Anthony Francis wrote: > Damon Estep wrote: > >> Try putting a 1 second wait as step 1 in the dialplan, the SIP invite is >> probably being send before the display IE arrives. The display IE is used >> for CNAM delivery, and should not exceed 15 characters. >> >> It is very common to put a message in the display IE that indicates that the >> CNAM info will be sent in a subsequent Facility IE, and for that you must >> wait 1 second. >> >> If the ISDN setup actually contains information in the display IE, and that >> is not being captured as the CNAM (callerid(name)) you might need to capture >> he ISDN messaging to debug it, the telco can usually provide such a trace. >> >> I would bet that the display IE contains a information following message, >> and what you really want is in the facility IE that follows. Very common, as >> is the Wait(1) workaround. >> >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oscar Patricio >> Sent: Wednesday, July 25, 2007 6:55 AM >> To: asterisk-users@lists.digium.com >> Subject: [asterisk-users] Display IE >> >> Hi! >> >> I have an Asterisk Box that has 2 E1 connections: one to the PSTN and >> one to a PBX. It is acting as a telephony gateway. I have a problem: the >> PSTN sends information in the Display IE (in setup, information , >> etc.messages) that the PBX needs por internal processing. >> >> The asterisk does not relay the ISDN frames coming from the PSTN. It >> regenerates them, and when it does, it ommits the Display IE. >> >> Is there a way that i can force the asterisk, not to ignore this IE in >> the ISDN messages? >> >> If anyone can shed some light on this issue, i would be very grateful. >> >> Thanks in advance, >> >> Best regards, >> >> Óscar Patrício >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> > Or trace it yourself with: > pri intense debug span 1 > > Make sure you change the 1 to whatever span these calls are coming across. > > Anthony > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users