Hi guys,
I spent a couple of hours in Google, but the problem
appears to be uncommon, so I'd like to ask about it here.
The problem is exactly the opposite to "Asterisk does
not detect FXO hangup". In my case it's the Telco who
does not appear to be detecting Asterisk's hangups.
Telco is Telus in Vancouver, Canada. The setup is very
simple -
Telco -> FXO/TDM400p -> * -> softphone
The log is -
-- Starting simple switch on 'Zap/4-1'
-- Executing [EMAIL PROTECTED]:1] Answer("Zap/4-1", "") in new stack
-- Executing [EMAIL PROTECTED]:2] Dial("Zap/4-1", "IAX2/alex|5|r") in new
stack
-- Called alex
-- Call accepted by 192.168.1.102 (format gsm)
-- Format for call is gsm
-- IAX2/alex-2 is ringing
-- Nobody picked up in 5000 ms
-- Hungup 'IAX2/alex-2'
-- Executing [EMAIL PROTECTED]:3] Hangup("Zap/4-1", "") in new stack
-- Hungup 'Zap/4-1'
At this point the caller (say, me on my cell phone) still
sits connected and enjoying the white noise. The longest I
waited was about 20 seconds and then I hung up.
Similar problem is described here (November 2006) -
http://lists.digium.com/pipermail/asterisk-dev/2006-November/024768.html
but there's no solution and the discussion is not very
helpful.
Any pointers and/or ideas are greatly appreciated.
Thanks,
Alex
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
