Have you completely ignored the telco suggestion and attempted pri_cpe? Sounds like a miscommunication in settings to me.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erik Anderson Sent: Monday, August 06, 2007 12:02 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] low-level dump for PRI dchan debugging lpdlnx04*CLI> pri show span 1 Primary D-channel: 24 Status: Provisioned, Down, Active Switchtype: Nortel DMS100 Type: Network I know it's odd, but the telco instructed me to set my equipment as the network end...hence pri_net: /etc/zaptel.conf loadzone=us defaultzone=us #Sangoma A102 port 1 [slot:10 bus:2 span: 1] span=1,1,0,esf,b8zs bchan=1-8 dchan=24 /etc/asterisk/zapata.conf [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;;Sangoma A102 port 1 [slot:10 bus:2 span: 1] switchtype=dms100 context=from-pstn group=1 signalling=pri_net channel => 1-8 There you go. As an aside, turns out that it's a national holiday in CA, so the Sangoma support guys are on vacation for the day. -erik _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
