-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, August 22, 2007 10:51 PM
To: asterisk-users@lists.digium.com
Subject: asterisk-users Digest, Vol 37, Issue 88
Send asterisk-users mailing list submissions to
asterisk-users@lists.digium.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.digium.com/mailman/listinfo/asterisk-users
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific than
"Re: Contents of asterisk-users digest..."
Today's Topics:
1. Re: 99 bottles of beer (David Cook)
2. DUNDi, So Easy A Caveman Could Do It! (JR Richardson)
3. Polycom behind NAT won't register to * server behind ALG
(Matthew Warren)
4. Re: Polycom behind NAT won't register to * server behind ALG
(Alex Balashov)
5. Re: Polycom and NAT (Darryl Dunkin)
6. Re: Polycom behind NAT won't register to * server behind ALG
(Henry L.Coleman)
7. Re: Polycom behind NAT won't register to * serverbehind ALG
(Marty Mastera)
8. rfc3680, reginfo+xml (Olivier)
9. How to re-read values from database in Trixbox (Edgar Guadamuz)
10. Re: How to re-read values from database in Trixbox
(Diego Iastrubni)
11. Re: Saftware RAID1 or Hardware RAID1 with Asterisk
(Richard Scobie)
12. How do I configure asterisk? (fateme fatah)
13. Which interface? (fateme fatah)
14. Re: rfc3680, reginfo+xml (Raj Jain)
15. Cisco firmwares 3.6.3 vs 3.8.6 (Adrian Marsh)
16. Re: compatibility of PRI Two B channel transfers TBTC/2BTC
(Matt Florell)
17. Re: DUNDi, So Easy A Caveman Could Do It! (Lenz)
18. Re: Cisco firmwares 3.6.3 vs 3.8.6 (Arnaud Ligot)
19. Re: rfc3680, reginfo+xml (Olivier)
20. asterisk with FAX problem (satish patel)
21. Re: Polycom and NAT (Klaverstyn, David C)
22. Re: How do I configure asterisk? (Atis)
23. Re: Polycom behind NAT won't register to * server behind ALG
(Eric "ManxPower" Wieling)
24. Re: 99 bottles of beer (Russell Handorf)
25. Re: Saftware RAID1 or Hardware RAID1 with Asterisk (Steven)
----------------------------------------------------------------------
Message: 1
Date: Tue, 21 Aug 2007 21:01:50 -0400
From: "David Cook" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] 99 bottles of beer
To: <asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
On 8/21/07, Steve Edwards <[EMAIL PROTECTED]> wrote:
>
> "To control the tv in this room, press 1. To control a tv in another
> room, press 2. To control the outside lights, press 3. To control the
> sprinklers, press 4, ..."
>
Before this thread I already had a Firecracker on the server, a fair
assortment of lights and the sprinklers are on an X10Pro Irrigation
Controller.
Damn, now I'm gonna be up all night.....
- dbc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070821/291de3
99/attachment-0001.htm
------------------------------
Message: 2
Date: Tue, 21 Aug 2007 20:51:51 -0500
From: "JR Richardson" <[EMAIL PROTECTED]>
Subject: [asterisk-users] DUNDi, So Easy A Caveman Could Do It!
To: asterisk-users@lists.digium.com, [EMAIL PROTECTED]
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1
Here you go folks:
ftp://ftp.ntcp.net/DUNDi_So_Easy.pdf
If someone would be so kind as to upload to the wiki, it will be much
appriciated.
Thank you all who replied to my poll questions.
As always, I hope this help.
JR
--
JR Richardson
Engineering for the Masses
------------------------------
Message: 3
Date: Tue, 21 Aug 2007 22:03:30 -0400
From: "Matthew Warren" <[EMAIL PROTECTED]>
Subject: [asterisk-users] Polycom behind NAT won't register to *
server behind ALG
To: <asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
Polycom's were simply not originally built for multi location VoIP. There
is no NAT support in the Polycom's. We have several networks, being an ISP,
and have found that when transversing one network say 192.168.2.x with the *
box on a 192.168.1.x the polycoms were able to communicate however sustained
a lot of one way audio problems. Moving thim onto the same network is the
only thing we have been able to reliable do. According to Polycom Support
this is what they are intended for and no definitive answer as to whether
they would support Stun or another method in the future. At least as of 6
months ago.
Matt
------------------------------
Message: 4
Date: Tue, 21 Aug 2007 22:17:17 -0400 (EDT)
From: Alex Balashov <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Polycom behind NAT won't register to *
server behind ALG
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
On Tue, 21 Aug 2007, Matthew Warren wrote:
> We have several networks, being an ISP, and have found that when
> transversing one network say 192.168.2.x with the * box on a 192.168.1.x
> the polycoms were able to communicate however sustained a lot of one way
> audio problems. Moving thim onto the same network is the only thing we
> have been able to reliable do.
Forgive what may be a naively misplaced line of questioning, but what
precisely does this have to do with NAT as such? Unless you mean to
imply otherwise, it would seem to me you are referring to 192.168.1.0/24
and 192.168.2.0/24 being intermediated by way of a router -- but not
necessarily NAT'd?
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : +1-678-954-0670
Direct : +1-678-954-0671
------------------------------
Message: 5
Date: Tue, 21 Aug 2007 20:24:14 -0700
From: "Darryl Dunkin" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Polycom and NAT
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
In your sip.conf, for the user:
nat=yes
To send keepalives for the UDP connection (depending on how flimsy the
device handling NAT is):
qualify=yes
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Klaverstyn, David C
Sent: Tuesday, August 21, 2007 17:51
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Polycom and NAT
Hi All,
I have a Polycom 501 that is behind a NAT. When it registers to the
Asterisk server it is using the IP address on the private network and
not the public IP of the NAT address.
Can someone tell me what I need to do so the phone registerers using an
internet address rather than the remote network NAT address.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070821/ad6382
7d/attachment-0001.htm
------------------------------
Message: 6
Date: Tue, 21 Aug 2007 23:25:22 -0400 (EDT)
From: "Henry L.Coleman" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Polycom behind NAT won't register to *
server behind ALG
To: asterisk-users@lists.digium.com
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain;charset=iso-8859-1
I think what Alex was trying to say was that Polycom IP Phones are an
example of immature product development. While they look very nice and
have a nice display the product doesn't compete very well compared to
other manufacturers.
The two most obvious flaws are that they cannot be NAT'ed so they cannot
be used as Off Premise eXtensions phones and the other being that they
take so long to configure and re-boot. I have a golden rule with any phone
that I plan on installing for a customer....If I can't get it working
within 20 minutes then don't use it. I'm afraid Polycom breaks my golden
rule.
With such a lot of competition in this market they should have sorted this
out two years ago.
--
Henry L. Coleman.
< Alex Balashov>
> On Tue, 21 Aug 2007, Matthew Warren wrote:
>
>> We have several networks, being an ISP, and have found that when
>> transversing one network say 192.168.2.x with the * box on a 192.168.1.x
>> the polycoms were able to communicate however sustained a lot of one way
>> audio problems. Moving thim onto the same network is the only thing we
>> have been able to reliable do.
>
> Forgive what may be a naively misplaced line of questioning, but what
> precisely does this have to do with NAT as such? Unless you mean to
> imply otherwise, it would seem to me you are referring to 192.168.1.0/24
> and 192.168.2.0/24 being intermediated by way of a router -- but not
> necessarily NAT'd?
>
> --
> Alex Balashov
> Evariste Systems
> Web : http://www.evaristesys.com/
> Tel :
> Direct :
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
------------------------------
Message: 7
Date: Tue, 21 Aug 2007 22:20:20 -0600
From: "Marty Mastera" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Polycom behind NAT won't register to *
serverbehind ALG
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="windows-1250"
> Polycom's were simply not originally built for multi location VoIP.
> There
> is no NAT support in the Polycom's. We have several networks, being an
> ISP,
> and have found that when transversing one network say 192.168.2.x with
> the *
> box on a 192.168.1.x the polycoms were able to communicate however
> sustained
> a lot of one way audio problems. Moving thim onto the same network is
> the
> only thing we have been able to reliable do. According to Polycom
> Support
> this is what they are intended for and no definitive answer as to
> whether
> they would support Stun or another method in the future. At least as
> of 6
> months ago.
>
> Matt
>
Although I do appreciate your response, I didn't intend to paint this as a
NAT issue in my original post. I have successfully deployed Polycom phones
behind NAT many times in the past when the * box was on a public IP without
a NAT or ALG present. This leads me to focus on the ALG as part of issue in
this case (not that the ALG in and of itself is the issue, but the
combination of Polycom and the ALG since other brands of phones work
properly). The link that I referred to in my original post referenced an
issue with the MD5 hash being different on either end due to differences in
the URI, causing a registration authentication problem (as I understand it).
I was just asking for assistance understanding what the link was recommended
as a fix.
Thanks!
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.484 / Virus Database: 269.12.1/963 - Release Date: 8/20/2007
5:44 PM
------------------------------
Message: 8
Date: Wed, 22 Aug 2007 08:53:28 +0200
From: Olivier <[EMAIL PROTECTED]>
Subject: [asterisk-users] rfc3680, reginfo+xml
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
Hi,
RFC3680 defines a SIP event package for registration.
This event package which can be used through NOTIFY-SUBSCRIBE methods, seems
very useful for free sitting or presence applications.
This package is supported in various SIP phones (at least Thomson ST2030) :
when turned on, this feature adds a new login/logout menu among other
things.
It can also be used to send Welcome notices to mobile users : whenever a
mobile user comes in, a SIP MESSAGE is sent by a software application which
has previously subscribed to be notified of any registration event related
to this mobile user.
It appears Asterisk supports SIP NOTIFY-SUBSCRIBE methods.
But I couldn't find any trace of this specific Registration Event package
support (but I won't swear I searched the right way).
How can I make sure this feature is supported or not ?
More precisely, this Registration Event package support relies on these
headers :
SIP SUBSCRIBE "reg" Event
SIP SUBSCRIBE "application/reginfo+xml" Accept
SIP NOTIFY "reg" Event
SIP NOTIFY "application/reginfo+xml" Content
How shall I check ?
Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/347dae
77/attachment-0001.htm
------------------------------
Message: 9
Date: Wed, 22 Aug 2007 01:22:13 -0600
From: "Edgar Guadamuz" <[EMAIL PROTECTED]>
Subject: [asterisk-users] How to re-read values from database in
Trixbox
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1
Hello guys,
I'm using Trixbox and I have a PHP application that updates a value in
the MySQL asterisk database as an interface to have a dynamic
customizable IVR.
After execute the UPDATE SQL query, the php application is supossed to
reload asterisk or restart amportal in order to get the change
working, but nor asterisk -rx reload nor amportal restart got the
change working.
So, the question is how can I re-read the new value from the database
to be effective in asterisk?
------------------------------
Message: 10
Date: Wed, 22 Aug 2007 10:42:52 +0300
From: Diego Iastrubni <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] How to re-read values from database in
Trixbox
To: asterisk-users@lists.digium.com
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
You are updating the MySQL config, which is not propagated to the Asterisk
config files. Only after you regenerate the configuratios, you can reload
asterisk.
Dirty hack: "need_reload" flag must be set to true.
Real solution: retrieve_conf + "asterisk reload"
On Wednesday 22 August 2007 10:22, Edgar Guadamuz wrote:
> Hello guys,
>
> I'm using Trixbox and I have a PHP application that updates a value in
> the MySQL asterisk database as an interface to have a dynamic
> customizable IVR.
>
> After execute the UPDATE SQL query, the php application is supossed to
> reload asterisk or restart amportal in order to get the change
> working, but nor asterisk -rx reload nor amportal restart got the
> change working.
>
> So, the question is how can I re-read the new value from the database
> to be effective in asterisk?
------------------------------
Message: 11
Date: Wed, 22 Aug 2007 20:05:38 +1200
From: Richard Scobie <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Saftware RAID1 or Hardware RAID1 with
Asterisk
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Steve Totaro wrote:
> I guess I am just lucky to have 24 hour manned data centers with staff
> that walk around looking for flashing LEDs.
>
> I am sure there is some error thrown in /var/log/messages about a
> failure that could be used to trigger a notification quite trivially.
>
Both smartd and mdadm can be configured to send emails.
Regards,
Richard
------------------------------
Message: 12
Date: Wed, 22 Aug 2007 02:38:56 -0700 (PDT)
From: fateme fatah <[EMAIL PROTECTED]>
Subject: [asterisk-users] How do I configure asterisk?
To: asterisk-users@lists.digium.com
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
Hi:
Which one is better and easier for configure asterisk,directly or by GUI ?
I'd appreciate any idea.
Regards.
---------------------------------
Building a website is a piece of cake.
Yahoo! Small Business gives you all the tools to get online.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/5771ba
2b/attachment-0001.htm
------------------------------
Message: 13
Date: Wed, 22 Aug 2007 02:40:10 -0700 (PDT)
From: fateme fatah <[EMAIL PROTECTED]>
Subject: [asterisk-users] Which interface?
To: asterisk-users@lists.digium.com
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
Hi:
If any body use meetmemanager or conman or web-meetme please say how about
is it.I'd appreciated any idea.
Regards.
---------------------------------
Be a better Heartthrob. Get better relationship answers from someone who
knows.
Yahoo! Answers - Check it out.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/894e1b
87/attachment-0001.htm
------------------------------
Message: 14
Date: Wed, 22 Aug 2007 06:23:36 -0400
From: "Raj Jain" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] rfc3680, reginfo+xml
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1
Olivier,
This feature is not supported in Asterisk. I can tell this looking at the
code.
If you want to test this yourself, send Asterisk a SUBSCRIBE message
with Event: reg header in it. You can either use an off-the-shelf UA
that supports RFC 3680 to do this or you can use SIPp (an open-source
SIP test tool) to do this. Since Asterisk does not support "reg"
event-package, it'll respond back with a 489 (Bad Event) response.
Raj
On 8/22/07, Olivier <[EMAIL PROTECTED]> wrote:
> Hi,
>
> RFC3680 defines a SIP event package for registration.
> This event package which can be used through NOTIFY-SUBSCRIBE methods,
seems
> very useful for free sitting or presence applications.
>
> This package is supported in various SIP phones (at least Thomson ST2030)
:
> when turned on, this feature adds a new login/logout menu among other
> things.
>
> It can also be used to send Welcome notices to mobile users : whenever a
> mobile user comes in, a SIP MESSAGE is sent by a software application
which
> has previously subscribed to be notified of any registration event related
> to this mobile user.
>
> It appears Asterisk supports SIP NOTIFY-SUBSCRIBE methods.
> But I couldn't find any trace of this specific Registration Event package
> support (but I won't swear I searched the right way).
>
> How can I make sure this feature is supported or not ?
>
> More precisely, this Registration Event package support relies on these
> headers :
> SIP SUBSCRIBE "reg" Event
> SIP SUBSCRIBE "application/reginfo+xml" Accept
> SIP NOTIFY "reg" Event
> SIP NOTIFY "application/reginfo+xml" Content
>
> How shall I check ?
>
> Regards
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
------------------------------
Message: 15
Date: Wed, 22 Aug 2007 12:26:07 +0100
From: "Adrian Marsh" <[EMAIL PROTECTED]>
Subject: [asterisk-users] Cisco firmwares 3.6.3 vs 3.8.6
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
Hi All,
A question for those with Cisco 7940/60 SIP phones. I used to load
POS3-06-03-00 Firmware to the cisco phones. A month or so ago, I ran
some tests and found that latest 3.8.6 firmware worked well, and solved
an issue or two on the phones.
I've a number of users who work outside of the LAN. Our phones use DNS
names to talk to A*k, so in theory, just enabling NAT makes the phone
work outside the LAN (home users, remote users, etc). However, when we
loaded the 3.8.6 firmware to these phones, we've found the phones no
longer work outside of the LAN. Using Etherreal, we've found that the
communication between the Phone and A*k breaks (A*k never sees the
Register packets, but the phone does seem to send them. I'll post more
detail if its needed, but I wondered if anyone else has seen this ? The
size of the IP packet for register is different (larger on the 3.8.6),
but the important content of the Register message seems the same. I've
ruled out ISP/firewall interference, as its happened on a number of
users.
Obviously there are fixes in 3.8.6, so I don't want to downgrade the
phones again, but I can't see why they'd fail...
Adrian Marsh
------------------------------
Message: 16
Date: Wed, 22 Aug 2007 07:31:02 -0400
From: "Matt Florell" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] compatibility of PRI Two B channel
transfers TBTC/2BTC
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1
On 8/21/07, Matthew Fredrickson <[EMAIL PROTECTED]> wrote:
> Matt Florell wrote:
> > Hello,
> >
> > A client has asked for Two B channel Transfer capability (known as
> > TBCT or 2BCT, similar to other features such as ECT, RTL and Q,SIG
> > Path Replacement) in a new Asterisk system and so I researched the
> > capability and came up with quite a few gaps in documentation.
> >
> > From what I've gathered, the official Digium statement is that is
> > works with DMS100 only, and only in Asterisk 1.4.X :
> > http://kb.digium.com/entry/26/140/
>
> This definitely works. I wrote it and tested it myself.
>
> >
> > Although in a bugtracker posting with a patch from over two years ago,
> > Matt Fredrickson from Digium says that it works with 5ESS under
> > Asterisk 1.2.X:
> > http://bugs.digium.com/view.php?id=3554
>
> There's an implementation I scrubbed out a couple of years ago, but I
> think there was a bug in it that I was not able to fix. When push came
> to shove, and I needed a switch to debug it on (and when I had more time
> to work on it), nobody offered switch access so that I could debug it.
> So I don't think it is working right now.
>
> > There are also bounties and claims of this feature working on NI2
> > protocol(although no patches posted) on the voip-info.org Wiki:
> >
http://www.voip-info.org/wiki/view/Asterisk+bounty+PRI+2B+channel+transfer+f
or+NI2+PRI+line
> >
http://www.voip-info.org/wiki/index.php?page=Asterisk%20bounty%20PRI%202B%20
channel%20transfer
>
> Yeah, well, they're really old :-) Try getting a hold of the authors.
I am trying to, I have sent a message to whitehawk82 on the digium
forums and hopefully he will post back to me. If anyone knows who that
actually is, I would like to get a hold of them, Please email me their
contact details.
Thanks for clearing all of this up Matt, Hopefully I'll be able to fix
the notes out there to give a better picture of all of this once I'm
done with this project.
Thanks,
MATT---
------------------------------
Message: 17
Date: Wed, 22 Aug 2007 14:04:52 +0200
From: Lenz <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] DUNDi, So Easy A Caveman Could Do It!
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; format=flowed; delsp=yes;
charset=iso-8859-15
Well done! It's top-news on AstPligg right now.
http://oinko.net/astpligg/story.php?title=DUNDi_So_Easy_A_Caveman_Could_Do_I
t
Thanks
l.
On Wed, 22 Aug 2007 03:51:51 +0200, JR Richardson
<[EMAIL PROTECTED]> wrote:
> Here you go folks:
>
> ftp://ftp.ntcp.net/DUNDi_So_Easy.pdf
>
> If someone would be so kind as to upload to the wiki, it will be much
> appriciated.
>
> Thank you all who replied to my poll questions.
>
> As always, I hope this help.
>
> JR
--
Loway Research - Home of QueueMetrics
http://queuemetrics.com
------------------------------
Message: 18
Date: Wed, 22 Aug 2007 14:13:20 +0200
From: Arnaud Ligot <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Cisco firmwares 3.6.3 vs 3.8.6
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain
FYI about cisco firmware:
http://www.cisco.com/warp/public/707/cisco-sr-20070821-sip.shtml
A.
On Wed, 2007-08-22 at 12:26 +0100, Adrian Marsh wrote:
> Hi All,
>
> A question for those with Cisco 7940/60 SIP phones. I used to load
> POS3-06-03-00 Firmware to the cisco phones. A month or so ago, I ran
> some tests and found that latest 3.8.6 firmware worked well, and solved
> an issue or two on the phones.
>
> I've a number of users who work outside of the LAN. Our phones use DNS
> names to talk to A*k, so in theory, just enabling NAT makes the phone
> work outside the LAN (home users, remote users, etc). However, when we
> loaded the 3.8.6 firmware to these phones, we've found the phones no
> longer work outside of the LAN. Using Etherreal, we've found that the
> communication between the Phone and A*k breaks (A*k never sees the
> Register packets, but the phone does seem to send them. I'll post more
> detail if its needed, but I wondered if anyone else has seen this ? The
> size of the IP packet for register is different (larger on the 3.8.6),
> but the important content of the Register message seems the same. I've
> ruled out ISP/firewall interference, as its happened on a number of
> users.
>
> Obviously there are fixes in 3.8.6, so I don't want to downgrade the
> phones again, but I can't see why they'd fail...
>
> Adrian Marsh
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------
Message: 19
Date: Wed, 22 Aug 2007 14:27:08 +0200
From: Olivier <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] rfc3680, reginfo+xml
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
Thanks for replying, Raj.
Do you think such feature should, ideally, be implemented in Asterisk should
it be implemented in a dedicated software (presence ?) ?
It seems to me it should, though I'm not aware of many devices using this
feature, beside SIP hardphones.
Would it be difficult to extend current code to comply with this RFC, when
rfc3265 mechanism is already in place ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/bfea6a
2a/attachment-0001.htm
------------------------------
Message: 20
Date: Wed, 22 Aug 2007 05:32:58 -0700 (PDT)
From: satish patel <[EMAIL PROTECTED]>
Subject: [asterisk-users] asterisk with FAX problem
To: asterisk-users@lists.digium.com
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
Dear all
I have setup of asterisk 1.2.14 and this is working fine.
first i want to explain you my setup of asterisk on network i have connect
my asterisk with mediant 2000 gateway and PRI terminated on mediant.
[fax_machin]------[audio_code_fxs]-----[Asterisk]-------[mediant_2000]---PRI
--<--<
my fax machine connected with audiocode 24 fxs extention and which is
connected with asterisk and asterisk connected with mediant 2000 now i am
not able to send FAX outside my company so is there any special
configuration for T.38 protocal ?? can anyone explain me how do i go ahead
with this setup to start FAX
---------------------------------
Pinpoint customers who are looking for what you sell.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/e203c3
64/attachment-0001.htm
------------------------------
Message: 21
Date: Wed, 22 Aug 2007 22:32:59 +1000
From: "Klaverstyn, David C" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Polycom and NAT
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
I have both of those command lines for my natted sip device.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Darryl
Dunkin
Sent: Wednesday, 22 August 2007 1:24 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom and NAT
In your sip.conf, for the user:
nat=yes
To send keepalives for the UDP connection (depending on how flimsy the
device handling NAT is):
qualify=yes
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Klaverstyn, David C
Sent: Tuesday, August 21, 2007 17:51
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Polycom and NAT
Hi All,
I have a Polycom 501 that is behind a NAT. When it registers to the
Asterisk server it is using the IP address on the private network and
not the public IP of the NAT address.
Can someone tell me what I need to do so the phone registerers using an
internet address rather than the remote network NAT address.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/20648d
be/attachment-0001.htm
------------------------------
Message: 22
Date: Wed, 22 Aug 2007 15:33:12 +0300
From: Atis <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] How do I configure asterisk?
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1
On 8/22/07, fateme fatah <[EMAIL PROTECTED]> wrote:
> Hi:
> Which one is better and easier for configure asterisk,directly or by GUI
?
> I'd appreciate any idea.
> Regards.
It's up to you to decide what's easier for you and your needs. For
beginners GUI is ok, but if you need some fancy functionality, you
will need to code config files for yourself. This question doesn't
have definite answer - some people prefer GUI management of their
servers, and thus choose MS IIS, and so on, but some prefer plain
config files (and choose Linux).
As a programmer i prefer config files (and that's more nerdy).
Regards,
Atis
--
Atis Lezdins,
IT Responsible of BEST Riga,
[EMAIL PROTECTED]
ICQ: 142239285
Skype: atis.lezdins
Cell Phone: +371 28806004 [Tele2, Latvia]
Work phone: +1 800 7502835 [Toll free, USA]
?BEST? -> www.BEST.eu.org
------------------------------
Message: 23
Date: Wed, 22 Aug 2007 08:08:37 -0500
From: "Eric \"ManxPower\" Wieling" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Polycom behind NAT won't register to *
server behind ALG
To: [EMAIL PROTECTED], Asterisk Users Mailing List -
Non-Commercial Discussion <asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Henry L.Coleman wrote:
> I think what Alex was trying to say was that Polycom IP Phones are an
> example of immature product development. While they look very nice and
> have a nice display the product doesn't compete very well compared to
> other manufacturers.
> The two most obvious flaws are that they cannot be NAT'ed so they cannot
> be used as Off Premise eXtensions phones and the other being that they
> take so long to configure and re-boot. I have a golden rule with any phone
> that I plan on installing for a customer....If I can't get it working
> within 20 minutes then don't use it. I'm afraid Polycom breaks my golden
> rule.
> With such a lot of competition in this market they should have sorted this
> out two years ago.
>
Reboots should not happen very often. This is a non-issue for most people.
I've never seen a phone that could not work with NAT with Asterisk.
Polycoms work just fine with NAT and Asterisk. The nice thing about
Asterisk's NAT support is that the phone does not need to support NAT.
------------------------------
Message: 24
Date: Wed, 22 Aug 2007 09:14:51 -0400
From: Russell Handorf <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] 99 bottles of beer
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users@lists.digium.com>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I've been working on an X10 component already. It works, but I wish the
CMA15 would work correctly in Linux (I know it's suppose to, but for
whatever reason the one I have just doesnt.) It's just a little AGI
script that I have working with Cepstral that throws http PUTs to the
Windows box that has Apache-PHP and the command line app. Yeah, I know.
But it wouldnt be this tedious if the CMA15 would appear correctly on my
* box.
(Oh, did I mention I made a LCARS Web GUI for this as well? :P)
Steve Edwards wrote:
> On Tue, 21 Aug 2007, Russell Bryant wrote:
>
>> Nice! While we're on the subject of silly but fun dialplan bits, check
out my
>> TV remote extension. When I moved a few months ago, there was a while
when I
>> couldn't find the wireless keyboard that I usually use as my TV remote to
>> control MythTV. So, I built dialplan so I could use a wireless phone as
my
>> remote, instead. The dialplan reads digits from the phone and sends the
correct
>> commands to a MythTV network control interface for the frontend
application.
>>
>> I posted my tested .conf version and the untested AEL version to the
MythTV
>> wiki. The AEL version would probably be prettier with macros, now that I
think
>> of it ...
>>
>>
http://www.mythtv.org/wiki/index.php/Controlling_MythTV_from_any_phone_using
_Asterisk
>
> And practical :)
>
> Almost every room in my house has a phone -- if I could teach my kids to
> put them back where they belong.
>
> This could easily be extended to recognize which phone was used so it
> could control the Myth FE in that room.
>
> Also, it could/should be extended to control x10 devices as well...
>
> "To control the tv in this room, press 1. To control a tv in another room,
> press 2. To control the outside lights, press 3. To control the
> sprinklers, press 4, ..."
>
> Thanks in advance,
> ------------------------------------------------------------------------
> Steve Edwards [EMAIL PROTECTED] Voice: +1-760-468-3867 PST
> Newline Fax: +1-760-731-3000
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
------------------------------
Message: 25
Date: Wed, 22 Aug 2007 09:50:29 -0400
From: "Steven" <[EMAIL PROTECTED]>
Subject: Re: [asterisk-users] Saftware RAID1 or Hardware RAID1 with
Asterisk
To: asterisk-users@lists.digium.com
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
For RAID1, I am not sure.
But for RAID 5, You should always use hardware RAID.
If you use software RAID and your CPU spikes for too long, you can corrupt
your disks. I have seen this several times.
--
--
Steven
http://www.glimasoutheast.org
"Vidura Senadeera" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
Dear All,
I would like to get community's feedback with regard to RAID1 ( Software
or Hardware) implementations with asterisk.
This is my setup
Motherboard with SATA RAID1 support
CENT OS 4.4
Asterisk 1.2.19
Libpri/zaptel latest release
2.8 Ghz Intel processor
2 80 GB SATA Hard disks
256 MB RAM
digium PRI/E1 card
Following are the concerns I am having
I'm planing to put this asterisk server in production enviorment which is
having E1 connection to the asterisk server, approximately
20 con-current calls, Music on hold, voice mail boxes.
1. If I use Software RAID, what would be the impact to my deployment? (
problems that I have to face with regard to the call flow )
2. If I use Hardware based RAID 1, what would be the impact to the system?
3. According to your practical experiance what is the ideal solution among
both options?
I will be highly appreciate your feedback on this regard.
--
Thanks & Regards,
Vidura Senadeera,
----------------------------------------------------------------------------
--
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/698629
c5/attachment.htm
------------------------------
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
End of asterisk-users Digest, Vol 37, Issue 88
**********************************************
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
