>>> On 9/5/2007 at 1:06 PM, Matthew Fredrickson <[EMAIL PROTECTED]> wrote: > Thomas Kenyon wrote: >> Joe Acquisto wrote: >>> I need to ask, to refresh, is the aux power connector on the TDM400P card > *only* to power the ringer on any >>> analog phones/devices on the system? >>> >>> Can I still use this board, to "terminate" POTS lines and use all SIP > Phones? >>> >> Yes, you only need to connect a power supply if you have FXS boards. >> >>> Due to circumstances, I end up with a 1u server that has no aux power > connectors available. I "have to" use this server, so am considering > abandoning the analog phones and using all SIP. >>> >>> IIRC, the aux power *is* only to power ringers. >>> >> I don't remember if it is also needed to provide the potential for the >> line as well, but I cat testify to the fact that you can comfortably run >> a TDM400P with 4 FXO boards on it and nothing plugged into the PSU header. > > That is correct. You *only* need the power connector plugged in for FXS > modules. FXO modules do not need them.
Thanks to all who responded. My hunt for cheap, err, inexpensive, Polycom's continues. joe a. _______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users