>So please provide a log with > set verbose 5 > capi debug Well, let's go for the debug log :-). In this capture, I used only one adapter, and I performed a call to asterisk, which dialed a number (as described in the previous mail) ; so this is the log :
-- Executing [EMAIL PROTECTED]:2] Dial("CAPI/contr1#02/123-7", "CAPI/contr1/b:103||tT") in new stack > data = contr1/b:103 format=8 > parsed dialstring: 'contr1' 'b' '103' '' > capi request controller = 1 == contr1#01: setting format alaw - 0x8 (alaw) > parsed dialstring: 'contr1' 'b' '103' '' > capi: peerlink -1 allocated, peer is unlinked == contr1#01: Call CAPI/contr1#01/103-8 (pres=0x03, ton=0x00) CONNECT_REQ ID=002 #0x0753 LEN=0047 Controller/PLCI/NCCI = 0x1 CIPValue = 0x1 CalledPartyNumber = <80>103 CallingPartyNumber = <00 83>b CalledPartySubaddress = default CallingPartySubaddress = default BProtocol B1protocol = 0x1 B2protocol = 0x1 B3protocol = 0x0 B1configuration = default B2configuration = default B3configuration = default GlobalConfiguration = default BC = default LLC = default HLC = default AdditionalInfo BChannelinformation = <00 00> Keypadfacility = default Useruserdata = default Facilitydataarray = default SendingComplete = default -- Called contr1/b:103 > CAPI devicestate requested for contr1#01/103 CONNECT_CONF ID=002 #0x0753 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 -- contr1#01: received CONNECT_CONF PLCI = 0x101 INFO_IND ID=002 #0x08ca LEN=0017 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x1e InfoElement = <81 88> INFO_RESP ID=002 #0x08ca LEN=0012 Controller/PLCI/NCCI = 0x101 -- contr1#01: info element PI 81 88 > contr1#01: In-band information available -- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Unknown control '14' (14) ] [contr1#01] INFO_IND ID=002 #0x08cb LEN=0016 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x18 InfoElement = <89> INFO_RESP ID=002 #0x08cb LEN=0012 Controller/PLCI/NCCI = 0x101 -- contr1#01: info element CHANNEL IDENTIFICATION 89 INFO_IND ID=002 #0x08cc LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x800d InfoElement = default INFO_RESP ID=002 #0x08cc LEN=0012 Controller/PLCI/NCCI = 0x101 -- contr1#01: info element SETUP ACK -- CAPI/contr1#01/103-8 is making progress passing it to CAPI/contr1#02/123-7 == contr1#02: Requested PROGRESS-Indication for CAPI/contr1#02/123-7 INFO_IND ID=002 #0x08ce LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8002 InfoElement = default INFO_RESP ID=002 #0x08ce LEN=0012 Controller/PLCI/NCCI = 0x101 -- contr1#01: info element CALL PROCEEDING -- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Unknown control '15' (15) ] [contr1#01] -- CAPI/contr1#01/103-8 is proceeding passing it to CAPI/contr1#02/123-7 == contr1#02: Requested PROCEEDING-Indication for CAPI/contr1#02/123-7 INFO_IND ID=002 #0x08dd LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8001 InfoElement = default INFO_RESP ID=002 #0x08dd LEN=0012 Controller/PLCI/NCCI = 0x101 -- contr1#01: info element ALERTING -- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Ringing (3) ] [contr1#01] -- CAPI/contr1#01/103-8 is ringing == contr1#02: Requested RINGING-Indication for CAPI/contr1#02/123-7 -- contr1#02: attempting ALERT in state 2 > CAPI devicestate requested for contr1#01/103 INFO_IND ID=002 #0x0915 LEN=0020 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x29 InfoElement = <07 09 06 10 26> INFO_RESP ID=002 #0x0915 LEN=0012 Controller/PLCI/NCCI = 0x101 -- contr1#01: info element Date/Time 07/09/06 16:38 INFO_IND ID=002 #0x0916 LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8007 InfoElement = default INFO_RESP ID=002 #0x0916 LEN=0012 Controller/PLCI/NCCI = 0x101 -- contr1#01: info element CONNECT CONNECT_ACTIVE_IND ID=002 #0x0918 LEN=0020 Controller/PLCI/NCCI = 0x101 ConnectedNumber = <00 83>103 ConnectedSubaddress = default LLC = default CONNECT_ACTIVE_RESP ID=002 #0x0918 LEN=0012 Controller/PLCI/NCCI = 0x101 CONNECT_B3_REQ ID=002 #0x078a LEN=0013 Controller/PLCI/NCCI = 0x101 NCPI = default -- contr1#01: sent CONNECT_B3_REQ PLCI=0x101 CONNECT_B3_CONF ID=002 #0x078a LEN=0014 Controller/PLCI/NCCI = 0x220101 Info = 0x0 CONNECT_B3_ACTIVE_IND ID=002 #0x0919 LEN=0013 Controller/PLCI/NCCI = 0x220101 NCPI = default CONNECT_B3_ACTIVE_RESP ID=002 #0x0919 LEN=0012 Controller/PLCI/NCCI = 0x220101 -- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Answer (4) ] [contr1#01] -- CAPI/contr1#01/103-8 answered CAPI/contr1#02/123-7 == contr1#02: Requested Indication-STOP for CAPI/contr1#02/123-7 > CAPI devicestate requested for contr1#01/103 P.S. : I'm always a bit ashamed to output such a mail, and to let other to manage finding some information in. _________________________________________________________________ Découvrez le Blog heroic Fantaisy d'Eragon! http://eragon-heroic-fantasy.spaces.live.com/ _______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users