I have a fresh 1.4.10.1 installation that appears to have a problem with g729 pass-through. I can see the gateway in question sending an INVITE using g729b. However, the Asterisk is only sending g711 in the INVITE to my Polycom phone.
[gateway] disallow=all allow=g729 [phone] disallow=all allow=ulaw allow=alaw allow=g729 There's the codec configs for the gateway and the phone in question. I even attempted to setup the phone with only the allow=g729, but in that instance it won't even complete the call. We had to add g711 support to the gateway in question for now to get it up and running, but we want to get it back to using only g729. CLI> show modules like g729 Module Description Use Count format_g729.so Raw G729 data 0 codec_g729a.so Annex A/B (floating point) G.729 Codec ( 0 2 modules loaded I downloaded the pre-compiled g729 module from Digium. The sip.conf references g729 and the codec module is loaded. Unless there's anything else I need to do that I'm missing? Thanks, Scott _______________________________________________ Sign up now for AstriCon 2007! September 25-28th. http://www.astricon.net/ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users