I've recompiled with the latest svn sources for zaptel, libpri, and Asterisk. Wanpipe is 3.3.0.p4. Switched the T1 cable. Same result.
(It's a Sasktel Megalink T1/PRI circuit) CLI> shows: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ == Primary D-Channel on span 1 up == Primary D-Channel on span 1 up == Primary D-Channel on span 1 down [Oct 1 20:15:19] WARNING[7120]: chan_zap.c:2393 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! == Primary D-Channel on span 1 up == Primary D-Channel on span 1 up CLI> pri show spans alternates between: PRI span 1/0: Provisioned, Down, Active (most of the time) and: PRI span 1/0: Provisioned, Up, Active (during its retry sequence - below) with debugging enabled: CLI> pri debug span 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Sending Set Asynchronous Balanced Mode Extended [..] Sending Set Asynchronous Balanced Mode Extended -- Got SABME from network peer. Sending Unnumbered Acknowledgement q921.c:709 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED q921.c:664 q921_dchannel_up: q921_state now is Q921_LINK_CONNECTION_ESTABLISHED == Primary D-Channel on span 1 up [above paragraph repeated 7 more times] > Protocol Discriminator: Q.931 (8) len=13 > Call Ref: len= 2 (reference 0/0x0) (Originator) > Message type: RESTART (70) > [18 03 a9 83 82] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 2 ] > [79 01 80] > Restart Indentifier (len= 3) [ Ext: 1 Spare: 0 Resetting Indicated Channel (0) ] -- Timeout occured, restarting PRI q921.c:356 t200_expire: q921_state now is Q921_LINK_CONNECTION_RELEASED Sending Set Asynchronous Balanced Mode Extended q921.c:150 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH == Primary D-Channel on span 1 down [Oct 1 20:30:49] WARNING[7003]: chan_zap.c:2393 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway! Sending Set Asynchronous Balanced Mode Extended [..] Sending Set Asynchronous Balanced Mode Extended # wanrouter status ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Devices currently active: wanpipe1 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 16 | 4 | 1 | EXT | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | AFT HDLC | N/A | Connected | File /etc/zaptel.conf is: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A101 port 1 [slot:4 bus:41 span: 1] span=1,0,0,esf,b8zs bchan=1-23 dchan=24 File /etc/asterisk/zapata.conf is: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A101 port 1 [slot:4 bus:41 span: 1] ; I also tried: switchtype=national switchtype=dms100 context=pstn-pri group=1 signalling=pri_cpe channel => 1-23 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Still struggling; thanks for any help and ideas. Alvin _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users