Here is how i overcome this problem, ignorpat => 9 exten => 9*,1,Dial(ZAP/1/w)
press 9* from your handset and after 1 second you have POTS line dial tone on your phone, On 10/3/07, Mojo with Horan & Company, LLC <[EMAIL PROTECTED]> wrote: > > It would be ugly, but you could prefix a zap channel or group number > before the phone number to dial. Using groups for an example: > > exten => _*X*X.,1,Dial(ZAP/g${EXTEN:1:1}/${EXTEN:3}) > exten => _*XX*X.,1,Dial(ZAP/g${EXTEN:1:2}/${EXTEN:4}) > > so dialing *4*18005551212 dials out over zap group 4... > > > bilal ghayyad wrote: > > I need to select a line from the Zap group channel > > using the SIP Phone (not FXO and not FXS ports). > > > > ignorepat does not work? > > > > Also, what is the method to let the second dial tone > > has another tone frequency? > > > > Regards > > Bilal > > > > ---------------- > > No, ignorepat is for FXS ports (FXS ports use FXO > > signaling). Also, > > ignorepat does not apply to SIP phones, because SIP > > phones provide > > their > > own dialtone, not a dialtone provided by Asterisk. > > > > Al lists wrote: > > > >> Correction, on FXO port not FXS, > >> second, read his email first: > >> "Also, how it will be possible to assign an > >> > > dedicated > > > >> line (connected to FXO) to an > >> button on the Polycom IP Phone or Broadtel IP Phone, > >> so if user select that button > >> then he will be sure that his outside call will be > >> > > via > > > >> that specific line." > >> Just assign a key on your phone to dial that > >> > > extension, and you will > > have > > > >> dial tone on selected line, > >> then as a traditional PBX you can send any digits to > >> > > your provider. > > > >> On 10/1/07, Eric ManxPower Wieling <[EMAIL PROTECTED]> > >> > > wrote: > > > >>> ignorepat continues dialtone after a leading digit > >>> > > has been dialed > > on > > > >>> FXS ports. How does ignorepat help this guy? > >>> > >>> Al lists wrote: > >>> > >>>> ignorpat is your friend > >>>> > >>>> On 9/30/07, Tzafrir Cohen > >>>> > > <[EMAIL PROTECTED]> wrote: > > > >>>>> On Sun, Sep 30, 2007 at 02:34:01AM -0700, bilal > >>>>> > > ghayyad wrote: > > > >>>>>> Dear List; > >>>>>> > >>>>>> How can I place a call via Zap/g1 (group) but > >>>>>> > > need to > > > >>>>>> determine the line (FXO port) > >>>>>> that will go via it? > >>>>>> > >>>>> Simply don't use groups. Use channels directly. > >>>>> > > To dial via the > > > >>> specific > >>> > >>>>> Zaptel channel NN, use Zap/NN > >>>>> > >>>>> Am I missing anything? > >>>>> > > > > > > > > > > > > > ____________________________________________________________________________________ > > Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's > updated for today's economy) at Yahoo! Games. > > http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow > > > > _______________________________________________ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users