The remote server is where your problem is. Alan Lord wrote: > Hello, > > This message is similar to one I posted before, but with a different > subject line and I've revised the description to hopefully make it clearer. > > The basic problem is I am trying to dial 2 numbers simultaneously using > the & construct. One device is a "locally attached" soft SIP phone. The > other device is also a soft SIP phone, but it is on a different Asterisk > server connected over the Internet using IAX. Normal calls between our > servers work fine. However, when I try to dial *both* devices, the > remote Asterisk server answers the call on the IAX channel before it has > checked to see if the real destination device (the SIP phone) is on, > available or busy etc. > > This is a problem because I am trying to route calls to a common > voicemail box if both lines are unavailable, busy or go unanswered. Once > the IAX channel answers the incoming call, the dialplan's job is > effectively done. Unfortunately, the remote Asterisk server clears the > call almost immediately, as it finds the real destination extension is > actually not available. > > Can anyone see where the problem is? Or suggest a better way? > > Many thanks. > > Alan > > Logs and configuration below: > > Here's the last bit of the log (I've edited out the IP address) - we are > both deliberately NOT answering our phones... > > Executing [EMAIL PROTECTED]:1] Macro("SIP/101-081d1050", > "belllord|SIP/101&IAX2/alanb/201|tolc") in new stack > -- Executing [EMAIL PROTECTED]:1] Dial("SIP/101-081d1050", > "SIP/101&IAX2/alanb/201|10|tr") in new stack > -- Called 101 > -- Called alanb/201 > [Oct 17 16:09:47] WARNING[2836]: channel.c:2634 ast_indicate_data: > Unable to handle indication 3 for 'SIP/101-081d1050' > -- SIP/101-081d4fc0 is ringing > -- Call accepted by 80.XXX.XX.XX (format alaw) > -- Format for call is alaw > -- IAX2/alanb-3 answered SIP/101-081d1050 > [Oct 17 16:09:47] NOTICE[2836]: cdr.c:434 ast_cdr_free: CDR on channel > 'SIP/101-081d4fc0' not posted > [Oct 17 16:09:47] DEBUG[1419]: chan_iax2.c:7435 socket_process: > Immediately destroying 3, having received hangup > [Oct 17 16:09:47] DEBUG[2836]: chan_iax2.c:3176 iax2_hangup: We're > hanging up IAX2/alanb-3 now... > [Oct 17 16:09:47] DEBUG[2836]: chan_iax2.c:3191 iax2_hangup: Really > destroying IAX2/alanb-3 now... > -- Hungup 'IAX2/alanb-3' > == Spawn extension (macro-belllord, s, 1) exited non-zero on > 'SIP/101-081d1050' in macro 'belllord' > == Spawn extension (macro-belllord, s, 1) exited non-zero on > 'SIP/101-081d1050' > > And here's the relevant bits of my extension.conf > > [globals] > ALANL=SIP/101 ; My Soft Phone > ALANB=IAX2/alanb/201 ; Alan's Extension > > [main_menu] ; Test Dialplan for IVR > exten => s,1,Answer() > exten => s,n,Set(TIMEOUT(digit)=5) ; Max time between digits > exten => s,n,Set(TIMEOUT(response)=15) ; Max time to wait > exten => s,n,Wait(1) > exten => s,n,Background(welcome-to-bell-lord) > exten => s,n(resume),Background(press-3-for-tolc) ; Short dialogues, > exten => s,n,Background(press-4-for-fondoo) ; rather than one long one > exten => s,n,Background(press-5-for-arrowtees) ; might need to change > exten => s,n,Background(press-6-for-gen-enq) ; frequently. > exten => s,n,WaitExten() > > exten => 3,1,Goto(tolc,s,1) ; Dial 3 For The Open Learning Centre > exten => 4,1,Goto(fondoo,s,1) ; Dial 4 for Fondoo Internet > exten => 5,1,Goto(arrowtees,s,1) ; Dial 5 for ArrowTees > exten => 6,1,Goto(gen_enq,s,1) ; For all other enquiries press 6 > > exten => i,1,Playback(pbx-invalid) > exten => i,n,Goto(resume) > > exten => t,1,Playback(vm-goodbye) > exten => t,n,Hangup() ; Might change this section to go to [gen_enq] > voicemail rather than just hangup. > > [tolc] > exten => s,1,Macro(belllord,${ALANL}&${ALANB},${CONTEXT}) ; Calls the > belllord Macro with the channel(s) to dial and the current context (for > business voicemail) > > [fondoo] > exten => s,1,Macro(belllord,${ALANL}&${ALANB},${CONTEXT}) > > [arrowtees] > exten => s,1,Macro(belllord,${ALANL},${CONTEXT}) > > [gen_enq] > exten => s,1,Macro(belllord,${ALANL}&${ALANB},${CONTEXT}) > > ; Call with Macro(belllord,channel,vmbox) > [macro-belllord] ; Uses macro and DIALSTATUS for local devices > exten => s,1,Dial(${ARG1},10,tr) > exten => s,n,Goto(s-${DIALSTATUS},1) > exten => s-NOANSWER,1,Voicemail([EMAIL PROTECTED],u) ; business is the > voicemail context, ${ARG2} is the context from which this call came > exten => s-BUSY,1,Voicemail([EMAIL PROTECTED],b) > exten => _s-.,1,Goto(s-NOANSWER,1) > > ============================== >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users