I am not sure if this is what you are looking for but I have this setup on a Cisco 7971. I just duplicated all of the <line button="1"> entries as <line button"2"> and I can have 2 calls going simultaneously, put each on hold, etc and only one sip peer shows in FreePBX. I'm using Trixbox 2.3.0.2 with Asterisk 1.4.10.1 and FreePBX 2.3.1.0. Pasted appropriate config lines below.
Regards Glenn <sipLines> <line button="1"> <featureID>9</featureID> <featureLabel>1187</featureLabel> <proxy>192.168.1.50</proxy> <port>5060</port> <name>1187</name> <displayName>1187</displayName> <autoAnswer> <autoAnswerEnabled>2</autoAnswerEnabled> </autoAnswer> <callWaiting>3</callWaiting> <authName>1187</authName> <authPassword>1187</authPassword> <sharedLine>false</sharedLine> <messageWaitingLampPolicy>3</messageWaitingLampPolicy> <messagesNumber>*97</messagesNumber> <ringSettingIdle>4</ringSettingIdle> <ringSettingActive>5</ringSettingActive> <contact>1187</contact> <forwardCallInfoDisplay> <callerName>true</callerName> <callerNumber>false</callerNumber> <redirectedNumber>false</redirectedNumber> <dialedNumber>true</dialedNumber> </forwardCallInfoDisplay> </line> <line button="2"> <featureID>9</featureID> <featureLabel>1187</featureLabel> <proxy>192.168.1.50</proxy> <port>5060</port> <name>1187</name> <displayName>1187</displayName> <autoAnswer> <autoAnswerEnabled>2</autoAnswerEnabled> </autoAnswer> <callWaiting>3</callWaiting> <authName>1187</authName> <authPassword>1187</authPassword> <sharedLine>false</sharedLine> <messageWaitingLampPolicy>3</messageWaitingLampPolicy> <messagesNumber>*97</messagesNumber> <ringSettingIdle>4</ringSettingIdle> <ringSettingActive>5</ringSettingActive> <contact>1187</contact> <forwardCallInfoDisplay> <callerName>true</callerName> <callerNumber>false</callerNumber> <redirectedNumber>false</redirectedNumber> <dialedNumber>true</dialedNumber> </forwardCallInfoDisplay> </line> -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bruce Komito Sent: Tuesday, October 23, 2007 11:48 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] Sharing lines with multiple buttons in Cisco 7960? Has anyone come up with a way of sharing a single SIP registration with two or more line buttons on the Cisco 79x0? This is possible on a Linksys 94x, but I haven't found the magic parameter on the Cisco (assuming there is one). TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815 _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users