Ok..so how would the CALLED and CALLERID ID be presented to Asterisk when using PRI signaling. Mike
_____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lyle Giese Sent: Friday, October 26, 2007 5:54 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Treating T1 as trunk in/out, not individual lines Michelle Dupuis wrote: I'm tying a Nortel option 61 to asterisk via T1. I don't want to split each of the t1 channels out into individual lines (tied to a specific extension) - so a trunk in and out. Assuming PRI over T1 signaling, how would I pass the CALLED and CALLER info across the channels so each side knows what to do? Is there something in the PRI protocol you can point me to for figuring this out? Thanks, MD _____ _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users That's what the D channel is for. A PRI is a primary rate ISDN. B channels carry voice, D channel handles the information & signalling in ISDN. Lyle
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users