Here's my planed setup : PRI from telco <--> (port 1 of A104d) * (port 2 of A104d) <--> PM3
The PM3, for those who don't know is lucent's portmaster RAS dial-up router. I had setup asterisk, zaptel, libpri, wanpipe (as I have sangoma's cards). In wancfg, I have port 1 as TDM_VOICE, with hardware echo on, span 1. Port 2 is TDM_VOICE, without hw echo, Clock as master, reference 0 (for the time being, I'm still not hooked up with my pri, will be 1 in the future), span 2. I alswo had to enable High Impedance on port 2 to operate without alarms. Zaptel.conf: ------------ loadzone=us defaultzone=us #Sangoma A104 port 1 [slot:12 bus:0 span: 1] span=1,1,0,esf,b8zs bchan=1-23 dchan=24 #Sangoma A104 port 2 [slot:12 bus:0 span: 2] span=2,0,0,esf,b8zs bchan=25-47 dchan=48 zapata.conf (part of) : ------------ ;Sangoma A104 port 1 [slot:12 bus:0 span: 1] switchtype=national pridialplan=unknown context=demo group=1 signalling=pri_cpe channel => 1-23 ;Sangoma A104 port 2 [slot:12 bus:0 span: 2] switchtype=national pridialplan=unknown context=demo group=2 signalling=pri_net channel => 25-47 Now, after start wanpipe and asterisk, my PM3 shows that the line is up (via a t1 cross-over cable). I see that the channels are idle and waiting. On * console, I get : Primary D-Channel on span 2 up All the time I also get sometime : == Primary D-Channel on span 2 down [Oct 31 20:50:53] WARNING[10250]: chan_zap.c:2393 pri_find_dchan: No D-channels available! Using Primary channel 48 as D-channel anyway! == Primary D-Channel on span 2 up [Oct 31 20:51:05] ERROR[10250]: chan_zap.c:8178 zt_pri_error: !! Got reject for frame 1, but we only have others! In my extensions.conf, I have : exten => 1234567,1,Dial(Zap/g2/${EXTEN}) Whem I trie that extension via a softphone, I hear hald a ring, and nothing else. The d-channel up continue to appear on the console. Any help would be appriciated. Nicolas _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users