On Tue, Nov 06, 2007 at 05:04:50PM -0500, Lutgring, Sam wrote: > When I execute a pickup on a ringing phone I get CALL FAILED REASON CODE > 603. I am dialing **212 with the following config. Anyone have a > suggestion?
I am not sure, but in the context where your extensions are, have you done: include => BLF_Group_Pickup > EXTENSIONS.CONF > -snip- > [BLF_Group_Pickup] > ; Defines how the extension to pick up a ringing phone in your BLF group > exten => _**XXX,1,Pickup(${EXTEN:2}) > exten => _**XXX,n,Hangup() > [BLF] > ; Defines a BLF Hint for phones > exten => 212,hint,SIP/sam > -snip- This bit should have some "context=" i,e, where your clients are dialling, do they have access to the [BLF_Group_Pickup] bits of the dial plan? (I think it can also be set as a default in the [general] part of sip.conf i,e, context=default if not defined in the SIP peer config, but for security reasons, your internal clients should ideally be in a separate context, so you can differentiate between internal and external connections and limit what they can dial.) Mine is called "from-client" and then in each [client] section in sip.conf, I have "context=from-client" You might also have to set the Pickup() command to pickup from the correct context, i.e. Pickup(${EXTEN:[EMAIL PROTECTED]) if it still doesn't work. > SIP.CONF > -snip- > [sam] > type=friend > username=sam > fromuser=sam > callerid=sam > host=dynamic > dtmfmode=RFC2833 > disallow=all > allow=ulaw > call-limit=20 > subscribecontext=BLF -- Robert Lister - London Internet Exchange - http://www.linx.net/ sip:[EMAIL PROTECTED] - inoc-dba:5459*710 - tel: +44 (0)20 7645 3510 _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users