Michael J. Liberatore wrote: > Would this be normal? Could this be a problem with the line? > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Alex > Balashov > Sent: Friday, November 23, 2007 8:20 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Annoying PRI Channels Restarting Message > > > My guess is that the B channels are in fact bouncing in and out of > service and the message is a reflection of it. > > On Fri, 23 Nov 2007, Michael J. Liberatore wrote: > > >> Hi all, i have recently setup a p2p t1 using sangoma t1 cards and >> asterisk 1.4. Its working great but i am getting an annoying message >> every little while in asterisk: >> >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/16 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/17 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/18 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/19 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/20 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/21 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/22 >> restarted on span 2 >> [Nov 23 19:17:57] VERBOSE[6487] logger.c: -- B-channel 0/23 >> restarted on span 2 >> >> >> Basically this goes through all 23 channels and then says its was >> successfully restarted. >> >> the link doesnt appear to be going down because there is nothing in >> the system log that normally comes up when the link actually goes up >> or down. this appears to be some asterisk thing. its not affecting >> calls as far as i can tell and doesnt seem to happen when the channels >> > > >> are in use. >> >> Any ideas? Can this be ignored? If so, can i safely disable this by >> changing it to a debug message in the code? Thats what i did with an >> annoying message caused by setting ext 700 as a orbit on a snom phone. >> >>
Check out resetinterval= **resetinterval**: sets the time in seconds between restart of unused channels, defaults to 3600 minimum 60 seconds. Some PBXs don't like channel restarts. so set the interval to a very long interval e.g. 100000000 or 'never' to disable *entirely*. http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf -- Bird's The Word Technologies, Inc. http://www.btwtech.com/ _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users