> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Russell Bryant > Sent: 01 December 2007 00:08 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] SLA: Handling of errors in outgoing call > > Steve Langstaff wrote: > > [line1_outbound] > > exten => disa,1,Disa(no-password|line1_outbound) > > exten => _XXXX,1,Dial(SIP/[EMAIL PROTECTED]) > > exten => _XXXX,2,Hangup > > > So to summarise: > > if I seize the line and dial a number known at vsp5000 > then I get > > ringing etc - good. > > if I seize the line and dial a number unknown at > vsp5000 then the > > call drops silently - not good. > > Your issue is actually in the [line1_outbound] context that I > have quoted above. > Here is what happens: > > As far as Disa() is concerned, any 4 digit number is a valid > extension. Once you dial something (whether is valid at the > other end or not), the call goes on and executes Dial(). > However, since the number you have dialed is not valid, > Dial() immediately returns and then Hangup is executed. That > is when the call is dropping. > > So, I can think of a few different ways to solve this issue. > The first couple involve using an IAX2 or DUNDi switch > statement in the line1_outbound context. > That would allow Asterisk to query the remote server as to > what extensions are valid. However, I won't get into the > details of how that is configured right now ... > > The other alternative is to solve it in the dialplan, with > something like this: > > [line1_outbound] > exten => disa,1,Disa(no-password|line1_outbound) > exten => _XXXX,1,Dial(SIP/[EMAIL PROTECTED]) > exten => _XXXX,n,Congestion > exten => _XXXX,n,Wait(10) ; Give Congestion for 10 seconds > exten => _XXXX,n,Hangup > > You could improve this even further by checking the > DIALSTATUS and playing different tones, or just hanging up, > accordingly. > > I hope this helps,
Thanks Russell... > exten => _XXXX,n,Congestion didn't work, but > exten => _XXXX,n,Playtones(congestion) did. _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users