I agree, if you never changed the jumper. I have never noticed, does the output of ztcfg change is it set to E1?
Roger C. Beraldi Martins wrote: > Richard, > > Thanks understood I will use this configurations for de last span. But > I think the Carlos Chávez are right about this. I realy forgot to put > jumpers to set E1 mode in TE420 card, if it's come with the jumpers > open (and I believe this) probably this is the problem. > > I don't know what parameter must be put on the module load to make > card up in E1 mode, then tomorrow I will have physical access on the > card and I will put all jumpers closed. > > Thanks to all again, then I write with the result. > > > 2007/12/3, Richard Lyman <[EMAIL PROTECTED]>: > >> #span=4,0,0,cas,hdb3 >> >> ^ uncomment that >> >> and >> >> cas=1-15:1101 >> cas=17-31:1101 >> >> cas=32-46:1101 >> cas=48-62:1101 >> >> cas=63-77:1101 >> cas=79-93:1101 >> >> unused=94-124 #whatever your ending is >> >> *snipped _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users