Eric C. wrote: > Hello all, > > Just starting to setup asterisk v 1.4.11 and need to run three distinct phone > systems for three different companies. > So far, I have inbound lines going to the appropriate dial plan within the > extensions.conf file. I'm using > > exten => _X.,1,NoOp(FROM NUMBER: ${SIP_HEADER(TO):5:10}) > > to determine which number is being dialed by the caller and then using a > gotoif to get to correct greeting (correct company). > > My question is... lets assume all three companies have extension numbers > being 2000, 2001 & 2002, how does one separate them? > Or, lets say the extensions are: > > company A --> 2000, 2001,2002 > company B --> 3000, 3001, 3002 > company C --> 4000, 4001, 4002 > > Since they're on one server with one asterisk process, how can I use context > correctly so that the user at 4002 cannot get through to the user at company > A whose extension is 2000 as currently, I can dial 2000 from phone 4002. > > That's my current problem, how should this be setup? Is my architecture > correct? Should I be running different processes for each company? Can > context resolve what I need? > > Please advise. > > thanks, > Otto >
First off, *nuke* the default context in sip.conf, extensions.conf, and voicemail.conf ... it will just get you into trouble! I do something like in my extensions.conf file: [incoming] exten => 2082292222,1,Goto(s,1,incoming-acme) exten => 2082293333,1,Goto(s,1,incoming-fido) exten => 2082294444,1,Goto(s,1,incoming-big-jims) ... [incoming-acme] exten => s,1,Answer() exten => s,n,Wait(0.75) exten => s,n(greeting),Playback(brief-directory-acme) exten => s,n(exten),Background(vm-enter-num-to-call) exten => s,n,WaitExten(5) exten => s,n(goodbye),Playback(vm-goodbye) exten => s,n(end),Hangup() ; these are the extensions that are exposed both to internal callers as ; well as to incoming calls... be careful what you put here. include => extens-acme exten => i,1,Playback(pbx-invalid) exten => i,n,Goto(s,exten) exten => t,1,Goto(s,goodbye) [internal-acme] exten => s,1,Answer() exten => s,n(exten),Background(vm-enter-num-to-call) exten => s,n,WaitExten(5) exten => s,n(goodbye),Playback(vm-goodbye) exten => s,n(end),Hangup() include => outbound-toll include => outbound-local include => extens-acme ; for our SIP phones, we can program a non-numeric extension exten => voicemail,1,VoicemailMain([EMAIL PROTECTED]) exten => voicemail,n,Hangup() ; and for DTMF coming through an ATA... exten => 777,1,Goto(voicemail) [extens-acme] exten => 111,1,Macro(stdexten,111,${PHILIP}) exten => 111,n,Goto(s,exten) ... [outbound-local] exten => _NXXXXXX,1,Dial(${TRUNK}/${AREA}${EXTEN},,r) exten => _NXXXXXX,n,Congestion() exten => _NXXXXXX,n,Hangup() [outbound-toll] exten => _NXXXXXXXXX,1,Dial(${TRUNK}/${EXTEN},,r) exten => _NXXXXXXXXX,n,Congestion() exten => _NXXXXXXXXX,n,Hangup() exten => _011.,1,Dial(${TRUNK}/${EXTEN:3},,r) exten => _011.,n,Congestion() exten => _011.,n,Hangup() Note: we had to modify the stdexten macro to be: [macro-stdexten]; ; ; Standard extension macro: ; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well) ; ${ARG2} - Device(s) to ring ; exten => s,1,Dial(${ARG2},20) ; Ring the inter exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on exten => s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable, send t exten => s-NOANSWER,2,MacroExit() ; If they press #, retur exten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voice exten => s-BUSY,2,MacroExit() ; If they press #, return to start exten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything exten => a,1,VoicemailMain(${ARG1}) that is, we got rid of all instances of "Goto(s,1,default)". The result is that if the caller bails out of voicemail or completes his message, the macro returns to the next priority. Hence having: exten => 111,1,Macro(stdexten,111,${PHILIP}) exten => 111,n,Goto(s,exten) you could also "Hangup()" as the 2nd priority... You would need to have "exten" defined as a label for both the "incoming-acme" as well as "internal-acme" contexts (and they will probably do different things). There are undoubtedly better ways to do this, but we find it's simple and maintainable and works well enough for us. -Philip ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// Thanks for the excellent model on how to set things up. That being said, if Company A and company B both want their extension to go from 2000 .. 200X, how best be that set up? _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users