hi jsmith: that explains everything. i didn't aware the module load sequence would cause big difference. is there any document about this i am missing? now the system is working as expected. i m glad that i asked and you answered. thanks a lot for your quick reply and help!!
Regards, tbskyd 2007/12/21, Jared Smith <[EMAIL PROTECTED]>: > On Thu, 2007-12-20 at 23:39 +0800, d tbsky wrote: > > hi: > > my system has one 4-port fxo card and one 2-port E1 card. > > for some reason, i like to place fxo as channel 1-4, and E1 use the > > rest channels (5-66). > > This will only work if you load the kernel driver for the fxo card > before the kernel driver for the E1 card. To see which order they've > come up in, you can check the /proc/zaptel directory. You should see a > file in that directory for each span, and if you look at the contents of > each file, you'll see which channels are in that span. > > -- > Jared Smith > Community Relations Manager > Digium, Inc. > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users