nhadie, meetme requires a zaptel timing device... ztdummy is unreliable when using meetme conferencing... I suggest you spend time elsewhere in * until you get a digium tdm400 w/ or w/o any daughter modules... you just need the board for the timing device you don't actually need any modules..... $195 for tdm400p + one mondule.. developers kit... daveC
Nhadie wrote: > hi shane, > > thanks for your reply. i actually tried 3 phones dialled to the > conference, but cant here anything from those phones. i also enabled the > usercount so i can hear something at least. but still no sound. > i'm using ztdummy, as i dont have a card yet. > > regards, > nhadie > > Shane D wrote: > >> Wouldn't you need someone besides yourself in the conference? >> >> On 1/7/08, Nhadie <[EMAIL PROTECTED]> wrote: >> >>> Hi All, >>> >>> kind of need help on the conference module, i'm using freepbx and >>> enabled conferencing, i created a conference number, 6000. when i dial >>> to it, my phone says it is connected but i'm hearing nothing, maybe logs >>> below can help you. >>> >>> also, when i hang up the phone, the conference did not disconnect me. >>> how can i end a conference? thank you >>> >>> -- Executing Macro("SIP/104-519e", "user-callerid|") in new stack >>> -- Executing NoOp("SIP/104-519e", "user-callerid: device 104") in >>> new stack >>> -- Executing Set("SIP/104-519e", "AMPUSER=104") in new stack >>> -- Executing GotoIf("SIP/104-519e", "0?report") in new stack >>> -- Executing GotoIf("SIP/104-519e", "0?start") in new stack >>> -- Executing Set("SIP/104-519e", "REALCALLERIDNUM=104") in new stack >>> -- Executing NoOp("SIP/104-519e", "REALCALLERIDNUM is 104") in new >>> stack >>> -- Executing Set("SIP/104-519e", "AMPUSER=104") in new stack >>> -- Executing Set("SIP/104-519e", "AMPUSERCIDNAME=104") in new stack >>> -- Executing GotoIf("SIP/104-519e", "0?report") in new stack >>> -- Executing Set("SIP/104-519e", "AMPUSERCID=104") in new stack >>> -- Executing Set("SIP/104-519e", "CALLERID(all)="104" <104>") in >>> new stack >>> -- Executing Set("SIP/104-519e", "REALCALLERIDNUM=104") in new stack >>> -- Executing NoOp("SIP/104-519e", "TTL: ARG1: ") in new stack >>> -- Executing GotoIf("SIP/104-519e", "0?continue") in new stack >>> -- Executing Set("SIP/104-519e", "__TTL=64") in new stack >>> -- Executing GotoIf("SIP/104-519e", "1?continue") in new stack >>> -- Goto (macro-user-callerid,s,23) >>> -- Executing NoOp("SIP/104-519e", "Using CallerID "104" <104>") in >>> new stack >>> -- Executing Set("SIP/104-519e", "MEETME_ROOMNUM=6000") in new stack >>> -- Executing GotoIf("SIP/104-519e", "0?USER") in new stack >>> -- Executing Answer("SIP/104-519e", "") in new stack >>> -- Executing Wait("SIP/104-519e", "1") in new stack >>> -- Executing Set("SIP/104-519e", "MEETME_OPTS=") in new stack >>> -- Executing Goto("SIP/104-519e", "STARTMEETME|1") in new stack >>> -- Goto (from-internal,STARTMEETME,1) >>> -- Executing MeetMe("SIP/104-519e", "6000||") in new stack >>> >>> >>> _______________________________________________ >>> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >> > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- My wife's sister is in California. I should buy her a Videophone2008! Truly, The Next Best Thing to Being There! -- WorldWideVideoPhones.com 856.380.0894 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users