On Tue, Jan 08, 2008 at 07:06:17PM +0100, Vincent wrote: > Hello > > Since TDM cards are known for being particular when it comes > to motherboards (PCI 2.2, etc.), I was wondering if there is a utility > that can check that the Zaptel driver works OK and can tell if the TDM > card is compatible? > > That way, if an FXO module is not reporting an incoming call, we'd > know it's because of the Zaptel driver, and not something elsewhere. > > Are "dmesg", "lspci -v", "ztcfg -vv" and "zttool" the only tools > available to investigate this issue? > > Thank you. > ================== > > PS: I'm using an OpenVox clone of the Digium card, with just one FXO > module. With the FXO module installed on plug #1, here's what I tried > so far. Note that "ztcfg -vv" says "1 channels to configure.", while > Digium cards apparently say ""1 channels configured":
This change is simply due to different versions of Zaptel. Zaptel >= 1.4.6 prints "to configure" because this message is printed (and has always been prinetd) before the configuration is actually applied. And hence fooled poor users into believing that their channels were properly configured. > ================= # cat zapata.conf > [channels] > language=fr > context=my-phones > usecallerid=yes > hidecallerid=no > immediate=no > > signalling=fxs_ks > echocancel=yes > echocancelwhenbridged=yes > channel=>1 > > ================= # cat /etc/asterisk/extensions.conf > [general] > > [globals] > > [my-phones] > exten => s,1,Verbose(yes!) In the Asterisk CLI run: core set verbose 3 And then see what happens when a call comes in. Basically you miss an action to do after the Verbose line. Alternatively, what is the output of: cat /proc/zaptel/* asterisk -rx 'zap show channels' -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users