Olivier wrote: > So, I think in this case (Ethernet link), "standard spandsp" doesn't > help as it needs a TDM board. Nope not the case at all. I have been doing fax--ATA--lan--Asterisk->email for quite some time without ANY zaptel interfaces. Zaptel creats the pseudo interface and that does the job. > But, as spandsp has recently gained T.38 support, it could help to > build email2fax or fax2email but I have no experience myself in it. Oh????? I asked about this and did not get a good answer. I will dig more into it. > I would be very curious to know. Stay tune. Got to run an errand right now.... > > Regards > > 2008/1/10, Jean-Louis curty <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > ok sorry for the confusion created, > I mean isdn network , in other word tdm, > so tdm link connected to patton, patton connected in the lan via > ethernet speaking sip, > > jl > > 2008/1/10, Olivier < [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > > > 2008/1/10, Jean-Louis curty <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > exactly > isdn patton -> eth/lan sip asterisk > > > so why is misdn installed for ? > it seems you don't have any ISDN card inside you Asterisk server. > > jl > > 2008/1/10, Olivier <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > > > 2008/1/10, Jean-Louis curty <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > I use 4960 and 4638 gw but it's applicable for any > patton gw ( analogue or isdn ) since it's always > the same way of configuring > - define ports > - define interface > - define services > > my config: > 1 asterisk > 1 patton ( let say 4638 ) > > the patton gw registers itself has a asterisk sip > peer, > inside the patton any sip call coming from > asterisk is routed to isdn ( outgoing calls ) > > > So patton and Asterisk are connected using Ethernet, > right ? > Or do you also have a TDM link between both boxes ? > > PSTN --- <TDM> --- Patton --- <Eth ? TDM ?> --- Asterisk > > in patton again , all isdn calls of any ports is > routed to the asterisk IP as a sip call, > > jl > > > > 2008/1/9, Olivier <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > > > 2008/1/8, Jean-Louis curty <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>>: > > Hi, > > I succesfully install spandsp chan_misdn > and digium card. the rxfax works fine and > I get the fax result by email. > I would like to do the same using a Patton > gw + zaptel but I can't receive fax anymore, > > > which patton product do you use ? > how are patton gw and asterisk connected to > each other ? > > the call comes in from ISDN in the Patton > gw, patton sends it to asterisk, asterisk > run a macro to make a tif file using rxfax, > the tif file is correctly created but with > a 0 size the call looks normal, 1 pages, > 45 seconds and disconnect but the file is > still 0, > > anyone succeeded in this ? > Many (many) thanks! > jean-louis > > _______________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com > <http://www.api-digital.com> -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com > <http://www.api-digital.com> -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com > <http://www.api-digital.com> -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com <http://www.api-digital.com> -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com <http://www.api-digital.com> -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com <http://www.api-digital.com> -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com > <http://www.api-digital.com> -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users